SRAC References

The verification plan of the Safety Related Application Conditions (SRAC) provides a generic frame to justify that the instruction of the associated installation and safety manual are fulfilled. These instructions in the Modicon M580, Safety Manual documentation are listed as requirements.

The following table provides the title of the paragraph where you can find the requirement related to the Application Life Cycle:

Application Life Cycle Requirement
Id	At this place
LC #1	Step 9: E/E/PE System safety requirements specification
LC #2	Step 9: E/E/PE System safety requirements specification
LC #3	Step 10: E/E/PE Safety related systems realisation
LC #4	Step 12: Overall installation and commissioning
LC #5	Step 12: Overall installation and commissioning
LC #6	Step 13: Overall safety validation
LC #7	Step 14: Overall operation, maintenance and repair
LC #8	Step 15: Overall modification and retrofit

The following table provides the title of the paragraph where you can find the requirement related to the Safety Information Message:

Safety Information Message Requirement
Id	At this place
SM #1	Before You Begin
SM #2	Start-up and Test
SM #3	Safety Loop
SM #4	Non Interfering Modules
SM #5	External Power Supply Used with Digital Safety I/O
SM #6	BMXSAI0410 Input Application Wiring Examples, Introduction
SM #7	BMXSAI0410 Input Application Wiring Examples, SIL3 Cat2/PLd
SM #8	BMXSAI0410 Input Application Wiring Examples, SIL3 Cat2/PLd with High Availability
SM #9	BMXSAI0410 Input Application Wiring Examples, SIL3 Cat4/PLe
SM #10	BMXSAI0410 Input Application Wiring Examples, SIL3 Cat4/PLe with High Availability
SM #11	BMXSDI1602 Wiring Connector, Process Power Supply
SM #12	BMXSDI1602 Wiring Connector, Fuse
SM #13	BMXSDI1602 Input Application Wiring Examples, Introduction
SM #14	Configurable Wiring Diagnostics in Control Expert
SM #15	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd
SM #16	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd
SM #17	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd
SM #18	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd with High Availability
SM #19	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd with High Availability
SM #20	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd with High Availability
SM #21	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd with High Availability
SM #22	BMXSDI1602 Input Application Wiring Examples, SIL3 Cat2/PLd with High Availability
SM #23	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #24	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #25	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #26	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #27	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #28	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #29	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #30	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe
SM #31	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe with High Availability
SM #32	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe with High Availability
SM #33	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe with High Availability
SM #34	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe with High Availability
SM #35	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe with High Availability
SM #36	BMXSDI1602 Input Application Wiring Examples, Cat4/PLe with High Availability
SM #37	BMXSDO0802 Wiring Connector, Fuse
SM #38	BMXSDO0802 Output Application Wiring Examples, Introduction
SM #39	BMXSDO0802 Output Application Wiring Examples, Introduction
SM #40	Configurable Wiring Daignostics in Control Expert
SM #41	Output Wiring Diagnostic Summary
SM #42	Output Wiring Diagnostic Summary
SM #43	Output Wiring Diagnostic Summary
SM #44	Output Wiring Diagnostic Summary
SM #45	Output Wiring Diagnostic Summary
SM #46	Output Wiring Diagnostic Summary
SM #47	BMXSRA0405 Wiring Connector, Fuse
SM #48	Application_1: 4 Outputs, SIL2 / Cat2 / PLc, De-energized State, No Automatic Signal Test
SM #49	Application_3: 4 Outputs, SIL2 / Cat2 / PLc, De-energized State, No Automatic Signal Test
SM #50	Application_5: 2 Outputs, SIL3 / Cat4 / PLe, De-energized State, No Automatic Signal Test
SM #51	Application_7: 2 Outputs, SIL3 / Cat4 / PLe, Energized State, No Automatic Signal Test
SM #52	M580 Safety Power Supplies, Introduction
SM #53	Description of the Time for Output Modules
SM #54	Configuring the Maximum CPU SAFE and FAST task periods
SM #55	Certified Safety Functions and Function Blocks
SM #56	Configuring the Time Synchronization with CPU firmware 3.10 or earlier, Introduction
SM #57	Changing the NTP Time Setting During Operations
SM #58	Procedure for Synchronizing the NTP Time Settings
SM #59	Procedure for Synchronizing the NTP Time Settings
SM #60	Configuring the S_WR_ETH_MX DFB
SM #61	Configuring the S_RD_ETH_MX DFB
SM #62	Configuring the S_WR_ETH_MX2 DFB
SM #63	Configuring the S_RD_ETH_MX2 DFB
SM #64	M580 Black channel Communications
SM #65	M580 Black channel Communications
SM #66	M580 Safety CPU LED Diagnostics
SM #67	Maintenance Mode Functionality
SM #68	Start Up Sequences, Warm Start
SM #69	Locking a Safety I/O Module Configuration
SM #70	Displaying Data on Operator Screens
SM #71	Configuring the CIP Safety Device Using a Vendor Provided Tool
SM #72	Interactions Between Safety PAC Operations and the Target Connection