Accessing the Web Utility Home Page

Introduction

Each Modicon Quantum 10-/100-Megabit Ethernet module contains an embedded Web server that allows you to access diagnostics and online configurations for the module and its associated controller (PLC).

Pages on the embedded Web site display the following information:

Configurable menus of the Address Server both BOOTP and DHCP and for SNMP
Ethernet statistics for the node
Controller’s configuration (Controller Status on menu)
Controller’s register values
Remote I/O status and configuration
Remote I/O register values
Remote I/O distributed values

The FactoryCast/Real Time modules offer these additional pages:

The web pages can be viewed using Internet Explorer 4.0 or higher. Either browser supports JRE 1.4.2_04 or higher.

For information about the additional functionality provided by the system in the Ethernet modules, see the FactoryCast Manual (31001229).

Accessing the Module’s Home Page

Do the following.

Step	Action
1	Obtain the full IP address or URL from your system administrator.
2	Type the address or URL in the address or location box in the browser window. The Schneider Electric Web Utility home page displays.
3	On the Quantum home page, click Diagnostics.
4	You will be requested to supply a user name and password.
5	After supplying the user name, password, and clicking OK, the Quantum Welcome Page appears. The Quantum Welcome Page provides the links to all the Quantum configuration and diagnostic pages and to the Data Editor / Data Monitor. NOTE: The default User Name is USER, and the default password is USER. Both should be changed by the system administrator during module installation.