This bit (status 1) indicates that an axis has Fast Stop status.
The bit is set to 0:
-
when the axis is disabled (ALLOW_ENABLE),
-
following a fault on the axis,
-
when the axis is re-activated (CONTROL_ENABLE),
-
-
Applied to Real and Imaginary Axis Functions
Axis in FastStop status.
Applied to the Functions of a Group of Co-ordinated Axes, Group of Slave Axes and SERCOS® Ring
This bit is set to 1 if all the member axis AXIS_FASTSTOP bits (AXIS_IS_LINKED) are set to 1.
