Configuring translator boost

At a Glance

Some translators have a boost input that can be configured on the TSX CFY 11 and 21.

Boost configuration screen

The configuration screen for translator boost is as follows:

Description

Two selections are conceivable:

Field	Meaning
Automatic control	For translators with a boost input, when this box is not checked, the translator boost is controlled by the object %Qr.m.c.14 BOOST. NOTE: The BOOST command remains active in automatic control mode. If the Automatic control option is checked, it is important to refrain from using this command to avoid any conflicts. For translators with a boost input, when this box is checked, the translator boost is automatically activated in the acceleration or deceleration phase of the moving part.
Inversion	When this box is not checked, the translator boost is active when the boost output is set to 1. When this box is selected, the translator boost is active when the boost output is set to 0.

Field

Meaning

Automatic control

For translators with a boost input, when this box is not checked, the translator boost is controlled by the object %Qr.m.c.14 BOOST.

NOTE: The BOOST command remains active in automatic control mode. If the Automatic control option is checked, it is important to refrain from using this command to avoid any conflicts.

For translators with a boost input, when this box is checked, the translator boost is automatically activated in the acceleration or deceleration phase of the moving part.

Inversion

When this box is not checked, the translator boost is active when the boost output is set to 1.

When this box is selected, the translator boost is active when the boost output is set to 0.