Modifying the Filtering Value for an Analog Module's Input Channels

At a Glance

This parameter defines the type of filtering for the input channel selected for analog modules.

The available filtering values are:

NOTE: If you've selected the Fast Scan Cycle, filtering is not taken into account.

5 modules manage this function:

Instructions

The following table provides instructions for defining the filter value assigned to input channels for analog modules.

Step	Action
1	Access the hardware configuration screen for the appropriate module.
2	Click on the arrow of the pull-down menu pertaining to the channel you wish to configure, in the Filter column. Result: the pulldown menu appears.
3	Select the filter value you wish to assign to the selected channel.
4	Validate the change with Edit → Validate.