To proceed with an update using an SD card, you need the following elements:
-
The software. Unity Pro version 6.0 or later has to be installed on the PC.
-
-
-
An SD card named transfer SD card in this chapter. It has to fit the targeted CPU, BMX NOE 01•0, or BMX PRA 0100 module and be dedicated to the CPU, BMX NOE 01•0, or BMX PRA 0100 module. Check the free memory available on the SD card (refer to Unity Loader documentation for the description of the necessary size).
NOTE: This SD card must be kept in the CPU or module after the update because the updated webpages are stored on the SD card.
-
A CPU (with the same reference as the CPU that needs to be updated), BMX NOE 01•0 (firmware V2.0 or later), or BMX PRA 0100.
-
A second SD card is necessary to update a BMX P34 2010 or BMX P34 2030 CPU.
BMX NOE 0100 with Firmware V1.0 and a DOM 0727 to 0803 Specific Procedure
The DOM (date of manufacturing) is printed on the side of the module. For example, reading DOM:0727 means that the module has been manufactured in 2007, week 27.
A BMX NOE 0100 module with firmware V1.0 and a DOM from 0727 to 0803 needs to be patched before update.
BMX P34 2010 or BMX P34 2030 Specific Procedure
For BMX P34 2010 update to BMX P34 20102, or BMX P34 2030 update to BMX P34 20302, you cannot perform the update using a single SD card. You need two different SD cards:
