Physical Description

External Features

The BMENOR2200H module has the same form factor as other M580 advanced communication modules. This figure shows the specific external features of this module:

Legend:

Item	Description	Function
1	LED array	Observe the LED display to diagnose the module.
2	MAC address	This manufacturer-defined address is unique for each individual module.
3	memory card slot	Store datalogging files (.csv) to the SD card. NOTE: This feature is reserved for future use.
4	serial port	This port is an isolated RS232/RS485 serial connector. NOTE: This feature is reserved for future use.
5	dual-bus backplane connector	This connection to the Modicon M580 rack supports Ethernet and X Bus communications.
6	rotary switch	Use this switch to set the cyber security level for the module.

NOTE: A ferule placed on the end of the serial port reduces the pinching of the cable by the removable cover. This reduces the risk of degrading the quality of the link by decreasing the likelihood of achieving the maximum bending radius of the cable.

Dimensions

The BMENOR2200H module conforms to the height of an M580 CPU and the width of a standard single-slot M580 communications module that has an SD card slot:

Rotary Switch

A three-position rotary switch is located on the back of the module. Set this switch to configure a cyber security operating mode for the module:

Refer to the detailed description of the rotary switch configuration.

Accessories

These additional hardware accessories are available:

Description	Comment
dust cover	Cover the module’s unused RJ45 ports with this stopper: The dust cover reduces the port’s exposure to atmospheric dust.
screwdriver	Use only the small, plastic screwdriver that was delivered with the module to set the rotary switch.