Characteristics of the outputs of module TBX ESP 08C22
(Original Document)
About us
General characteristics
This table presents the characteristics of the outputs of module TBX ESP 08C22:
Module TBX ESP 08C22
Nominal voltage
24 V DC
Nominal current
0,5 A
OS supply voltage limits
19.2 to 30 VDC
Permitted filament lamp power
8 W
Leakage current at OFF state
< 2 mA
Residual voltage at ON state
< 0,4 V
Switching time at ON or OFF state
≤ 1 ms
Load impedance at ON state
> 50 Ω
<  3 kΩ
Outputs protected against overloads
Yes: thermal
Sensor power supply protected against overvoltages
Yes: Zener diode
Protection against reverse polarity on preactuator power supply
No
Detection of break in load
Yes
Conforms to IEC 1131
Yes
Compatible with DC inputs
Yes
Type of logic
Positive
Power dissipated per channel when ON
0,25 W
Connections
The following table illustrates channel connection for module TBX ESP 08C22
Illustration
Terminal
Description
Type M12 female connector (one per channel).
1
+24 V (supplied by module)
2
not connected
3
0 V (supplied by module)
4
preactuator signal
5
ground connection