How to Access the Forcing/Unforcing Function

At a Glance

This function supports the modification of the state of all or some of the channels of a module.

The state of a forced output is fixed and can only be modified by the application after unforcing.

NOTE: However, in the event of a fault causing outputs to fallback, the statuses of these take the value defined on configuration of the Fallback mode parameter.

The different available commands are:

For one or more channels:
- Forcing to 1,
- Forcing to 0,
- Unforcing (when the selected channel or channels have been forced).

For all the channels on the module (when at least one channel is forced):
- Global unforcing of channels.

Procedure

The following table shows the procedure for forcing or unforcing all or some of the channels of a module:

Step	Action for one or more selected channels	Action for all channels
1	Access the module's debug screen.
2	In the State column, right click on the cell of the required channel.	Click on the Global Unforce button in the module area.
3	Select the desired function. Force to 0, Force to 1, Unforce.	-