How to Access the SET and RESET Commands
(Original Document)
About us
At a Glance
These commands are used to modify the state of a module's outputs to 0 (RESET) or 1 (SET).
NOTE: The state of the output assigned by one of these commands is temporary and can be modified at any time by the application when the PLC is in RUN.
Procedure
The following table shows the procedure for assigning the value 0 or 1 to all or some of the channels of a module.
Step
Action for one channel
1
Access the module's debug screen.
2
In the State column, right click on the cell of the required channel.
3
Select the desired function.
  • Set,
  • Reset.