The dialog box is shown if the simulator is simulating a CPU from the Modicon Momentum family.
Representation of the dialog box:
The RUN display is always on, green when a project is loaded in the simulator.
The SER COM display is flashing yellow when data is exchanged between Control Expert (or other clients) and the simulator.
The other grayed displays of the front plate are not supported by the simulator.
The Card Acc and memory card are represented but they do not concern Modicon Momentum CPUs.
The Reset button is represented but it does not concern Modicon Momentum CPUs.
With this button, you simulate a warm start of the CPU. It means that the connection between Control Expert and the simulator is broken, the current project variables remain and the simulator goes into the state RUN (autostart active) or STOP (autostart deactivated).
A power cycle corresponds to a power off and power on of a real power supply.
Dialog box fields:
Host PC name:
DNS name of the host PC for the simulator. If the PC has multiple network cards, only the first is shown.
Host IP address:
TCP/IP address of the host PC for the simulator. If the PC has multiple network cards, only the first is shown.
Project name:
Name of the project loaded in the simulator.
