Event Input

Introduction

The Event input selection zone is used to:

define the type of event to be detected on the event input of the channel , for G05, G07, G10 and G11 instructions.
define the type of event used for the storage of position function, which can store one or two positions (PREF1 and PREF2).

Storage of Position

If the application does not require a length measurement, the storage possibilities are as follows:

Storage possibilities	Storage	Icon
Standard rising edge and PREF1 processing	PREF1	(1)
Falling Edge and PREF1	PREF1	(1)

If the application requires a length measurement, the storage possibilities are as follows:

Storage possibilities	Storage	Icon
Rising edge and PREF1, then rising edge and PREF2	PREF1, PREF2	(1)
Rising edge and PREF1, then falling edge and PREF2	PREF1, PREF2	(1)
Falling edge and PREF1, then falling edge and PREF2	PREF1, PREF2	(1)
Falling edge and PREF1, then rising edge and PREF2	PREF1, PREF2	(1)

(1) The icon shows when storage occurs. For example,

The position PREF1 is detected on the first rising edge of the event input and the position PREF2 is detected on the second rising edge of the event input.