Model:

Model number

Media:

10Base-T

HALF DUPLEX

100Base-T

HALF DUPLEX

Adapter:

Running

Stopped

Crash Log Empty

Yes

No - A crash log entry appears.

Total transaction count

Displays number of transaction completed.

IP address

Displays IP Address.

MAC address

Displays MAC Address

Receive interrupts and transmit interrupts

Displays number of times the PCNET controller chip has generated interrupts.

Transmit timeout errors

Displays number of times the transmitter has been on the channel longer than the interval required to send the maximum length frame of 1519 bytes. The Transmit timeout error is also known as a babble error.

Collision errors

Displays number of collisions detected by the Ethernet chip.

Missed packet errors

Displays number of times a received frame was dropped because a receive descriptor was not available.

Memory errors

Displays number of times an Ethernet controller chip experienced an error accessing shared RAM. A memory error will cause a restart.

Network interface restart count

Displays number of times the Ethernet controller chip was restarted due to fatal runtime errors, including memory errors, transmit buffer errors, and transmit underflow.

Framing errors

Displays number of times an incoming frame contained a non-integer multiple of eight bits.

Overflow errors

Displays number of times the receiver has lost part or all of an incoming frame, due to an inability to store the frame in memory before the internal FIFO overflowed.

CRC errors

Displays number of times a CRC (FCS) error was detected on an incoming frame.

Receive buffer errors

Displays number of times a receive buffer was not available while data chaining a received frame.

Transmit buffer errors

Displays number of times the end packet flag on the current buffer was not set and the Ethernet controller did not own the next buffer. A transmit buffer error causes a restart.

Silo underflow

Displays number of times a packet was truncated due to data late from memory. A Silo Underflow will cause a restart.

Late collision

Displays number of times a collision was detected after the slot time of the channel had elapsed.

Lost carrier

Displays number of times a carrier was lost during a transmission.

Transmit limit retries

Displays number of times the transmitter has failed after 16 attempts to transmit a message, due to repeated collisions.