Selecting the Adjustment Values for the Input Channels and Measurement Forcing

At a Glance

Use this function to modify the filter, alignment and forcing value of one or more channels of an analog input module.

The available commands include:

forcing
filter
alignment

To align several analog channels on the X80 input modules, we recommend proceeding channel by channel. Test each channel after alignment before moving to the next channel, in order to apply the parameters correctly.

Procedure

To modify the filter, forcing and alignment values, follow these steps:

Step	Action for a channel
1	Access the debug screen.
2	Select the channel to be modified in the Display zone and double-click in the corresponding box. Result: The Adjust channel dialog opens:
3	Place the cursor in the Forcing field. Enter the forcing value. Send the forcing order by clicking the Force button.
4	Click the drop-down menu in the Filtering field, and define the new selected filter value. Confirm this selection by clicking Enable.
5	Place the cursor in the Target Value field, then input a target value. Confirm this selection by clicking Enable.
6	Close the Adjust channel dialog. Results: The new filter, forcing or alignment value appears in the box corresponding to the selected channel in the Debug tab.