140CFI00800 Quantum CableFast Cabling Block
Original instructions
About us
Overview
The I block is used for analog inputs. This interface provides plus, minus, shield, and power supply interfaces for both field and loop power configurations.
See Common Features of the CableFast Cabling System for information on common specifications and features of CableFast cabling blocks.
Application Notes
The following are the application notes for the 140CFI00800 module.
  1. Configuration – Eight analog inputs with a common loop supply. Each point is allocated four terminals.
  2. Compatibility – This terminal block provides eight connection point sets for the 140ACI03000 and 140AVI03000 analog input modules.
Dimensions
The following figures show the dimensions for the 140CFI00800 module.
Wiring Diagram (Source Grounding)
The following figure shows the wiring for the140CFI00800 (source grounding) module.
NOTE:
  1. When using a single power supply, there will be no channel-to-channel isolation of input points.
  2. For the required jumper options for the 140ACI03000 and the 140AVI03000, see the wiring diagrams in ACI03000 I/O Module and AVI03000 I/O Module .
  3. The GND (ground) terminal point is not connected.
Wiring Diagram (Instrument Grounding)
The following figure shows the wiring for the140CFI00800 (instrument grounding) module.
NOTE:
  1. When using a single power supply, there will be no channel-to-channel isolation of input points.
  2. For the required jumper options for the 140ACI03000 and the 140AVI03000, see the wiring diagrams in ACI03000 I/O Module and AVI03000 I/O Module..
  3. The GND (ground) terminal point is not connected.
Wiring Diagram (Chassis Grounding)
The following figure shows the wiring for the 140CFI00800 (chassis grounding) module.
NOTE:
  1. When using a single power supply, there will be no channel-to-channel isolation of input points.
  2. For the required jumper options for the 140ACI03000 and the 140AVI03000, see the wiring diagrams in ACI03000 I/O Module and AVI03000 I/O Module .
  3. The GND (ground) terminal point is not connected.