TSX PSY 1610 power supply module
(Original Document)
About us
Characteristics
The TSX PSY 1610 module is a single format non-isolated direct current power supply module.
Reference
TSX PSY 1610
Primary
Nominal voltage (not isolated)
24 VDC
Voltage limits (including ripple) (1) (possible up to 34 V for 1 hour in every 24 hours)
19.2 to 30 Vdc
Nominal input current: Irms at 24 Vdc
≤1.5 A
Initial power-up at 25°C (2)
I
signal
≤ 100A at 24 Vdc
I2t
on locking
6 A2s
It
on locking
0.1 As
Accepted length of micro-power outages
≤1 ms
Integrated input protection
via 5x20 time delay fuse, 3.5 A
Secondary
Total output (typical)
30 W
5VDC output
Nominal voltage:
5 V
Nominal current
3 A
Power (typical)
15 W
24VR output (24VDC relay) (3)
Nominal voltage:
U network – 0.6 V
Nominal current
0.6 A
Power (typical)
15 W
Built-in output protection against (4)
Overloading
yes
Short circuits
yes
Over-voltage
yes
Power dissipation
10 W
Auxiliary functions
Alarm relay
yes (1 contact closed, free from potential on terminal block)
Display
yes, via LED on front panel
Back-up battery
yes (status monitored via LED on front panel of module)
Conformity to the norms
IEC1131-2
(1) With the supply of "relay output" modules, the limit range is reduced to 21.6... 26.4 V.
(2) These values should be taken into account when starting up several devices at the same time, and for dimensioning the protection systems.
(3) 24 Vdc output for supplying relays of "relay output" modules.
(4) The 24 VR output voltage, which cannot be accessed by the user, is protected by a fuse which is located under the module (5x20, 4 A, Medium type).