Finalizing the installation of the TSX FPC 10 Card
(Original Document)
About us
At a Glance
After the driver installation and configuration phase, the operating system does not automatically recognize the ISA TSX FPC 10 card and its driver.
Installation Principles
As this card is not automatically recognized by the operating system, the following phases must be carried out:
Step
Action
1
Select the hardware type:
See How to Select the Hardware Type.
2
Configure the parameters of the operating system to recognize the card:
See How to Configure Hardware Parameters,
3
Switch off the PC.
4
Adjust the card parameters (See How to Adjust the TSX FPC 10 ISA Card Parameters):
  • the standard I/O address,
  • the IRQ interrupt address.
5
Connect the card to the ISA bus.
6
Turn the PC back on.
Result: the driver is operational.