Status Summary

Introduction

Use the Status Summary page to view the status of:

the LEDs located on the front of the BMX NOC 0401 Ethernet communication module
the Ethernet services supported by the communication module
the communication module in its role as:
- scanner
- Modbus TCP server
- EtherNet/IP messaging server

Status Summary Display

The Status Summary page looks like this:

To open this page:

Step	Action
1	Starting at the Home page, click the Diagnostics main menu item. The Diagnostics page opens.
2	On the left side of the Diagnostics page, select Ethernet → Status Summary.
3	If necessary, type in the HTTP web access password. NOTE: The default password is USER.

Status Summary Data

The LEDs section of the page can present the following operational states:

LED	Color	Text Descriptions
RUN	Green	Ready for operation
RUN	Gray	Not ready for operation
ERR	Red	Fault detected
ERR	Gray	No fault detected
ETH STS	Green	In operation
	Red	Duplicate IP
		Waiting for BootP server response
		Default IP Address in use
		IP Address Configuration conflict detected
MS (module status)	Green	In operation
	Red	Not configured
		Fault detected
		Recoverable fault detected
NS (network status)	Green	Connections established
	Red	No EtherNet/IP connections
		Connection error detected
		Duplicate IP address

The Services section of the page can present the following functional conditions:

Function	Color	Text Descriptions
DHCP Server	—	Enabled
FDR Server		Disabled
QoS Tagging
IGMP Snooping
Access Control
Port Mirroring
RSTP
Network Time Service	—	Enabled
Email Service	—	Disabled
Scanner Status	Green	Working properly
	Red	At least one connection is bad
	Gray	Not configured