lecrabe

Hello @Cyclusalexis Alors quel DWG te convient le mieux ? Bonne soiree, Bye, lecrabe

Hello SVP tu ouvres ce DWG "pourri" en Mode RECUPERER et tu obtiens : -- 2443 erreurs recuperees -- 16 entites effacees / supprimees Franchement ca serait BIEN de travailler avec de BONs DWGs ! C un bloc anonyme de type "*U963" Bye, lecrabe

Hello @Cyclusalexis https://www.grosfichiers.com/jEkfZWWKFKh BON j ai essaye de simplifier un peu le RVT !? Et donc voici 2 DWGs en M : l un avec QUE des 3DPolyfaces (88 Mo) et l autre avec beaucoup de 3DSolids (138 Mo) ... J espere que cela te conviendra car je ne sais pas comment faire "mieux" ... SVP tu me raconteras ... Bye, lecrabe

Hello OK je vais essayer de supprimer tout ce qui est en dehors de ton Polygone ROUGE !? Wait and See ... Bye , lecrabe

Hello @Cyclusalexis Pourtant le DWG ne fait que 150 Mo ... Tu as combien de Ram sur ton PC ? Je suis sur un tres vieux PC de 2012 : HP Workstation All In One G1 sous Win 10 - ZERO carte graphique -- Et un tres vieux Xeon 4C/8T qui marche bien et qui culmine a 3.5 Ghz ! -- Mais j ai 32 Go Ram ECC donc je peux charger des GROS DWGs et GROS RVTs (si je suis patient !) ... SVP tu regardes l image jointe de REVIT sur le GROS RVT de 491 Mo ... Je ne vois pas trop comment le simplifier pour avoir un DWG "plus petit" !? Est ce utile pour toi ce RVT ?? Bye, lecrabe

Hello @Cyclusalexis Si necessaire, je peux te "refaire" le 1er envoi des 2 DWGs en METRE et beaucoup de 3D Solids !? Je pense que le 2eme DWG (en M) qui montre d autres batiments dans la rue est "plus ou moins" inutile !? SVP tu me diras !? Bye, lecrabe PS: je suis un vieux Schtroumpf VENAL donc cela te coutera un excellent Whisky single malt !

Hello @Jbrosteaux 1) Ton Core i9-13900HX ne servira a RIEN avec ses 24 Cores et 32 Threads ! SVP tu demandes un 8-10-12 Cores (16-20-24 Threads) ultra rapide, ce sera BIEN suffisant !! 2) OK pour 64 Go Ram en 2 barrettes de 32 Mo OU pour 64 Go Ram en 4 barrettes de 16 Mo 3) Tres bien les 2 SSDs de 500 Go (ou peut etre 1 To) RAPIDEs 4) La NVidia GeForce RTX 4090 16 Go est "tres surdimensionnee" a mon avis ! Une RTX 4080 16 Go sera suffisante ! ... Voire meme une RTX 4070 12 Go Ram ... 5) Les economies realisees te permettront de SOIGNER la garantie et contrat de maintenance !! Au fait on se connait ?? Bye, lecrabe

Hello @Cyclusalexis https://www.grosfichiers.com/vjJ5cmucmqp Voici le 2eme RVT de 500 Mo en DWG (150 Mo - Unites en M et 3D Solid) ... Est ce OK pour toi ? J ai pris 1 Vue 3D ... Mais il y a au moins une centaine de Vues 2D/3D dans ce Projet donc Bof !? Bye, lecrabe

Hello @Cyclusalexis Desole pour les 2 DWGs en CM avec beaucoup de 3D Polyfaces, j ai mal parametre mon Export DWG ! Le prochain sera en Metre (si cela ne te gene pas !?) avec beaucoup plus de 3D Solids ! Preparation en cours ... Bye, lecrabe

Hello @Cyclusalexis https://www.grosfichiers.com/cy5EW3h39YA Voici le 1er RVT de 154 Mo en DWG (Unites en CM) ... Est ce OK pour toi ? J ai pris 2 Vues 3D differentes (2 DWGs de 9 Mo et 24 Mo) ... Mais il y a au moins une centaine de Vues 2D/3D dans ce Projet donc Bof !? Bye, lecrabe

Hello OUI mais il me semble que les 2 RVT sont identiques dans les 2 liens !? Bye, lecrabe PS: traitement en cours du fichier "AUBERVILLIERS_ZAC_Port_Chemin_Vert_RVT20_Central" (154 Mo) avec mon RVT 2021.1.7 ...

Hello SVP pourquoi 2 liens WET ? Bye, lecrabe

Hello SVP sur CE Sujet / Topic, tu etudies mon message No 6 : https://forums.autodesk.com/t5/civil-3d-et-infraworks-francais/civil-3d-specification-pour-le-futur-pc/td-p/11227013 Bonne semaine, La Sante, Bye, lecrabe

Hello J adore cette Superbe Routine "CookieCutter2" (Alias "CC") de Joe Burke ... C du "costaud" ! Bon dimanche, La Sante, Bye, lecrabe ;;;; ;;;; http://forums.autodesk.com/t5/Visual-LISP-AutoLISP-and-General/Delete-everything-within-or-outside-of-a-boundary/td-p/2444510 ;;;; ;; By Joe Burke ;; Comments and bug reports may be sent to lowercase@hawaii.rr.com. ;; What does CC2 do which ExpressTools extrim, AKA CookieCutter, doesn't? ;; Works with blocks, hatches and regions by exploding them. ;; Other object types which cannot be trimmed are left intact. ;; Works with objects which do not use a Continuous linetype. ;; Offers an option to delete all objects on visible layers either ;; inside or outside the selected trim object. ;; The interface is similar to extrim. ;; First extrim prompt: ;; Pick a POLYLINE, LINE, CIRCLE, ARC, ELLIPSE, IMAGE or TEXT for cutting edge... ;; Select objects: ;; Confusing because the routine does not allow multiple object selection. ;; Plus it works with some object types not mentioned, like splines. ;; First CookieCutter2 prompt: ;; Select circle or closed polyline, ellipse or spline for trimming edge: ;; The object must be closed or appear to be closed. ;; Second extrim prompt: ;; Specify the side to trim on: ;; Second CookieCutter2 prompt: ;; Pick point on side to trim: ;; Third CookieCutter2 prompt: ;; One of the following depending on whether the point picked is inside ;; or outside the trim object. ;; Erase all objects inside? [Yes/No] <N>: ;; Erase all objects outside? [Yes/No] <N>: ;; If Yes, all objects on visible layers are erased. If No it behaves ;; like extrim. ;; Both CC2 and extrim only operate on objects on visible layers. ;; The routine will display an additional prompt if one or more solid ;; hatches intersects the trim object. ;; Convert solid hatch to lines? [Yes/No] <N>: ;; If Yes, solid hatches are converted to lines using the ANSI31 pattern ;; and the lines are trimmed. If No, solid hatches are not trimmed. ;; Miscellaneous Notes: ;; The routine may be used to simply erase all objects inside or ;; outside the trim object. ;; The routine does not trim annotation objects such as text, mtext, ;; dimensions, leaders, mleaders and tables. The user may choose to ;; explode some of these objects types before running the routine. ;; It ignores xrefs. Bind xrefs beforehand if those block objects ;; should be trimmed. ;; Some cleanup may be needed after the routine ends. ;; The routine offsets the selected trim object inside or outside in ;; order to determine trim points. The offset distance is a variable ;; which depends on the size if the trim object. Likewise, if solid ;; hatches are converted to lines, the scale of the ANSI31 pattern ;; depends on the same variable. ;; The routine will end (exit) if offset fails or offset creates more ;; than one new object. Message at the command line: ;; "Problem detected with selected object. Try another. Exiting... " ;; Self-intersecting trim objects are not allowed. The select object ;; part of the routine checks for this and cycles if a self-intersecting ;; object is selected. ;; Version history: ;;; Version 1.0 posted at theswamp 8/26/2008. ;;; Version 1.1 9/25/2008. Minor bug fix to set the correct layer of ;;; an attribute converted to text after exploding a block. ;;; Version 1.2 posted at theswamp 11/28/2008. Fix a bug reported by cjw. ;;; Example, the delete all inside or outside option is chosen. ;;; The end of a line which is inside or outside the trim object ;;; is on the edge of the trim object. The line should be deleted. ;;; It was not before. (defun c:CookieCutter2 ( / *error* *acad* doc ps osm as om emode pmode offd elev locked typ typlst e d notclosed splinetyp i o intpts lst sc minpt maxpt hidelst dellst offsetename offsetobj trimename trimobj curcoord mark postlst coord reg selfinter ext UCSpkpt UCStrimobjpts WCStrimobjpts delother side ssinside ssall sscross ssoutside ssintersect solidflag solidans solidlst sskeep sstest testename WCSoffsetobjpts UCSoffsetobjpts CC:GetScreenCoords CC:TraceObject CC:GetInters CC:SpinBar CC:AfterEnt CC:CommandExplode CC:ExpNestedBlock CC:FirstLastPts CC:GetBlock CC:AttributesToText CC:UniformScale CC:SSVLAList CC:Inside CC:UnlockLayers CC:RelockLayers CC:ZoomToPointList Extents) (defun *error* (msg) (cond ((not msg)) ((wcmatch (strcase msg) "*QUIT*,*CANCEL*")) (T (princ (strcat "\nError: " msg))) ) (setvar "pickstyle" ps) (setvar "osmode" osm) (setvar "autosnap" as) (setvar "edgemode" emode) (setvar "projmode" pmode) (setvar "orthomode" om) (setvar "elevation" elev) (setvar "offsetdist" offd) (setvar "cmdecho" 1) (if (and offsetobj (not (vlax-erased-p offsetobj))) (vla-delete offsetobj) ) (if testename (entdel testename)) (foreach x hidelst (if (not (vlax-erased-p x)) (vlax-put x 'Visible acTrue) ) ) (if (and trimobj (not (vlax-erased-p trimobj))) (vla-highlight trimobj acFalse) ) (CC:RelockLayers locked) (vla-EndUndoMark doc) (princ) ) ;end error ;;;; START SUB-FUNCTIONS ;;;; ;; by Tony Tanzillo ;; Returns the lower left and upper right corners of a point list. (defun Extents (plist) (list (apply 'mapcar (cons 'min plist)) (apply 'mapcar (cons 'max plist)) ) ) ;end ;; Argument: WCS point list. ;; In lieu of (command "zoom" "object"...) which requires 2005 or later. (defun CC:ZoomToPointList (pts) (setq pts (Extents pts)) (vlax-invoke *acad* 'ZoomWindow (car pts) (cadr pts)) (vlax-invoke *acad* 'ZoomScaled 0.85 acZoomScaledRelative) ) ;end ;; Unlock any locked layers in the active file. ;; Returns a list of unlocked layers if any. (defun CC:UnlockLayers (doc / laylst) (vlax-for x (vla-get-Layers doc) ;filter out xref layers (if (and (not (vl-string-search "|" (vlax-get x 'Name))) (eq :vlax-true (vla-get-lock x)) ) (progn (setq laylst (cons x laylst)) (vla-put-lock x :vlax-false) ) ) ) laylst ) ;end ;; Argument: a list of layer objects from CC:UnlockLayers. (defun CC:RelockLayers (lst) (foreach x lst (vl-catch-all-apply 'vla-put-lock (list x :vlax-true)) ) ) ;end ;Returns the coordinates of the current view, lower left and upper right. ;Works in a rotated view. (defun CC:GetScreenCoords ( / ViwCen ViwDim ViwSiz VptMin VptMax) (setq ViwSiz (/ (getvar "VIEWSIZE") 2.0) ViwCen (getvar "VIEWCTR") ViwDim (list (* ViwSiz (apply '/ (getvar "SCREENSIZE"))) ViwSiz ) VptMin (mapcar '- ViwCen ViwDim) VptMax (mapcar '+ ViwCen ViwDim) ) (list VptMin VptMax) ) ;end ;; By John Uhden. Return T if point is inside point list. ;; Check how many intersections found with an "infinite" line (like a ray). ;; If the number intersections is odd, point is inside. ;; If the number intersections is even, point is outside. (defun CC:Inside (p ptlist / p2 i n #) ;; define a point at a sufficiently large distance from p... (setq p2 (polar p 0.0 (distance (getvar "extmin")(getvar "extmax")))) ;; Make sure the ptlist is closed... (if (not (equal (car ptlist) (last ptlist) 1e-10)) (setq ptlist (append ptlist (list (car ptlist)))) ) (setq i 0 # 0 n (1- (length ptlist))) (while (< i n) (if (inters p p2 (nth i ptlist)(nth (1+ i) ptlist)) (setq # (1+ #)) ) (setq i (1+ i)) ) (not (zerop (rem # 2))) ) ; end CC:Inside ;Argument: selection set. ;Returns: list of VLA objects. (defun CC:SSVLAList (ss / obj lst i) (setq i 0) (if ss (repeat (sslength ss) (setq obj (vlax-ename->vla-object (ssname ss i)) lst (cons obj lst) i (1+ i) ) ) ) (reverse lst) ) ;end ;; Returns a list of primary enames after ename ent. ;; Filter out sub-entities and entities not in current space. (defun CC:AfterEnt (ent / lst entlst) (while (setq ent (entnext ent)) (setq entlst (entget ent)) (if (and (not (wcmatch (cdr (assoc 0 entlst)) "ATTRIB,VERTEX,SEQEND")) (eq (cdr (assoc 410 entlst)) (getvar "ctab")) ) (setq lst (cons ent lst)) ) ) (reverse lst) ) ;end (defun CC:SpinBar (sbar) (cond ((= sbar "\\") "|") ((= sbar "|") "/") ((= sbar "/") "-") (t "\\") ) ) ;end (defun CC:TraceObject (obj / typlst typ ZZeroList TracePline TraceCE TraceSpline) ;;;; start trace sub-functions ;;;; ;; Argument: 2D or 3D point list. ;; Returns: 3D point list with zero Z values. (defun ZZeroList (lst) (mapcar '(lambda (p) (list (car p) (cadr p) 0.0)) lst) ) ;; Argument: vla-object, a heavy or lightweight pline. ;; Returns: WCS point list if successful. ;; Notes: Duplicate adjacent points are removed. ;; The last closing point is included given a closed pline. (defun TracePline (obj / param endparam anginc tparam pt blg ptlst delta inc arcparam flag) (setq param (vlax-curve-getStartParam obj) endparam (vlax-curve-getEndParam obj) ;anginc (* pi (/ 7.5 180.0)) ;;;; note 7.5 here vs 2.5 at circle anginc (* pi (/ 2.5 180.0)) ;; the two should be the same ) (while (<= param endparam) (setq pt (vlax-curve-getPointAtParam obj param)) ;Avoid duplicate points between start and end. (if (not (equal pt (car ptlst) 1e-12)) (setq ptlst (cons pt ptlst)) ) ;A closed pline returns an error (invalid index) ;when asking for the bulge of the end param. (if (and (/= param endparam) (setq blg (abs (vlax-invoke obj 'GetBulge param))) (/= 0 blg) ) (progn (setq delta (* 4 (atan blg)) ;included angle inc (/ 1.0 (1+ (fix (/ delta anginc)))) arcparam (+ param inc) ) (while (< arcparam (1+ param)) (setq pt (vlax-curve-getPointAtParam obj arcparam) ptlst (cons pt ptlst) arcparam (+ inc arcparam) ) ) ) ) (setq param (1+ param)) ) ;while (if (> (length ptlst) 1) (progn (setq ptlst (vl-remove nil ptlst)) (ZZeroList (reverse ptlst)) ) ) ) ;end ;; Argument: vla-object, an arc, circle or ellipse. ;; Returns: WCS point list if successful. (defun TraceCE (obj / startparam endparam anginc delta div inc pt ptlst) ;start and end angles ;circles don't have StartAngle and EndAngle properties. (setq startparam (vlax-curve-getStartParam obj) endparam (vlax-curve-getEndParam obj) ;;;;;;;;;;;;;; note change here, was using 7.5 ;;;;;;;;;;;;; ;anginc (* pi (/ 7.5 180.0)) ;; This version is from SuperFlatten. ;; I think it returns a tighter trace. anginc (* pi (/ 2.5 180.0)) ) (if (equal endparam (* pi 2) 1e-6) (setq delta endparam) ;added abs 6/23/2007, testing (setq delta (abs (- endparam startparam))) ) ;Divide delta (included angle) into an equal number of parts. (setq div (1+ (fix (/ delta anginc))) inc (/ delta div) ) ;Or statement allows the last point on an open ellipse ;rather than using (<= startparam endparam) which sometimes ;fails to return the last point. Not sure why. (while (or (< startparam endparam) (equal startparam endparam 1e-12) ;(equal startparam endparam) ) (setq pt (vlax-curve-getPointAtParam obj startparam) ptlst (cons pt ptlst) startparam (+ inc startparam) ) ) (ZZeroList (reverse ptlst)) ) ;end (defun TraceSpline (obj / startparam endparam ncpts inc param fd ptlst pt1 pt2 ang1 ang2 a) (setq startparam (vlax-curve-getStartParam obj) endparam (vlax-curve-getEndParam obj) ncpts (vlax-get obj 'NumberOfControlPoints) inc (/ (- endparam startparam) (* ncpts 6)) param (+ inc startparam) fd (vlax-curve-getfirstderiv obj param) ptlst (cons (vlax-curve-getStartPoint obj) ptlst) ) (while (< param endparam) (setq pt1 (vlax-curve-getPointAtParam obj param) ang1 (angle pt1 (mapcar '+ pt1 fd)) param (+ param inc) pt2 (vlax-curve-getPointAtParam obj param) fd (vlax-curve-getfirstderiv obj param) ang2 (angle pt2 (mapcar '+ pt2 fd)) a (abs (@delta ang1 ang2)) ) (if (> a 0.00436332) (setq ptlst (cons pt1 ptlst)) ) ) ;add last point and check for duplicates (if (not (equal (setq pt1 (vlax-curve-getEndPoint obj)) (car ptlst) 1e-8)) (setq ptlst (cons pt1 ptlst)) ) (ZZeroList (reverse ptlst)) ) ;end ;;;; primary trace function ;;;; (setq typlst '("AcDb2dPolyline" "AcDbPolyline" "AcDbSpline" "AcDbCircle" "AcDbEllipse") ) (or (eq (type obj) 'VLA-OBJECT) (setq obj (vlax-ename->vla-object obj)) ) (setq typ (vlax-get obj 'ObjectName)) (if (vl-position typ typlst) (cond ((or (eq typ "AcDb2dPolyline") (eq typ "AcDbPolyline")) (cond ((or (not (vlax-property-available-p obj 'Type)) (= 0 (vlax-get obj 'Type)) ) (TracePline obj) ) ) ) ((or (eq typ "AcDbCircle") (eq typ "AcDbEllipse")) (TraceCE obj) ) ((eq typ "AcDbSpline") (TraceSpline obj) ) ) ) ) ;end CC:TraceObject ; Arguments: ; firstobj: first object - ename or vla-object ; nextobj: second object - ename or vla-object ; mode - extend options ; acExtendNone: extend neither object ; acExtendThisEntity: extend first object ; acExtendOtherEntity: extend second object ; acExtendBoth: extend both objects ; Returns a WCS point list or nil if intersection not found. (defun CC:GetInters (firstobj nextobj mode / coord ptlst) (if (= (type firstobj) 'ENAME) (setq firstobj (vlax-ename->vla-object firstobj))) (if (= (type nextobj) 'ENAME) (setq nextobj (vlax-ename->vla-object nextobj))) (if (not (vl-catch-all-error-p (setq coord (vl-catch-all-apply 'vlax-invoke (list firstobj 'IntersectWith nextobj mode))) ) ) (repeat (/ (length coord) 3) (setq ptlst (cons (list (car coord) (cadr coord) (caddr coord)) ptlst)) (setq coord (cdddr coord)) ) ) (reverse ptlst) ) ;end ;; Note 7/24/2008, saw the annonymous *E81 block thing again as in ;; SuperFlatten. It happens when trying to explode an NUS block. ;; In this case a grid block (was xref bound) was NUS. The grid lines ;; were exploded, but the column blocks inside it were not. ;; All of them were placed in the *E81 block. ;; I suppose there might be a report about this. At the end you could ;; check the blocks which remain in the drawing. If any has a name ;; like *E81, report, "A non-uniformly scaled block could not be exploded." (defun CC:CommandExplode (obj / lay mark attlst name exlst newattlst) (setq mark (entlast)) (if (and (not (vlax-erased-p obj)) (eq "AcDbBlockReference" (vlax-get obj 'ObjectName)) ) (progn (setq lay (vlax-get obj 'Layer) attlst (vlax-invoke obj 'GetAttributes) ) (vl-cmdf "._explode" (vlax-vla-object->ename obj)) ;; Is this still fixing error in error handler? ;; Yes it is IMPORTANT! (command) (if (and (not (eq mark (entlast))) (setq exlst (CC:SSVLAList (ssget "_p"))) ) (progn (setq newattlst (CC:AttributesToText attlst)) (foreach x exlst (if (eq "AcDbAttributeDefinition" (vlax-get x 'ObjectName)) (vla-delete x) ) ) (setq exlst (vl-remove-if 'vlax-erased-p exlst)) (if newattlst (setq exlst (append exlst newattlst))) ;If an exlpoded object is on layer 0, put it on the ;layer of the exploded object. If its color is byBlock, ;change color to byLayer. (foreach x exlst (if (eq "0" (vlax-get x 'Layer)) (vlax-put x 'Layer lay) ) (if (zerop (vlax-get x 'Color)) (vlax-put x 'Color 256) ) ) ) ) ) ) ;if ;(setq exlst (vl-remove-if 'vlax-erased-p exlst)) (foreach x exlst (if (and (not (vlax-erased-p x)) (eq "AcDbBlockReference" (vlax-get x 'ObjectName)) ) (CC:ExpNestedBlock x) ) ) ) ;end CC:CommandExplode ;; Argument: block reference vla-object. ;; Explode the block passed and any nested blocks. ;; Doesn't deal with attributes yet. Convert to text. ;; Based on code by TW-Vacation at theswamp. ;; Leave this function as is. Trying to condense it ;; will only cause problems. (defun CC:ExpNestedBlock (obj / lay lst attlst) ;; Do SpinBar here because exploding many blocks is what ;; causes the routine to take a long time in some cases. (princ (strcat "\rProcessing blocks... " (setq *sbar (CC:SpinBar *sbar)) "\t") ) (if (and obj (not (vlax-erased-p obj)) ) (cond ((not (CC:UniformScale obj)) (CC:CommandExplode obj) ) (T (setq lay (vlax-get obj 'Layer)) (if (eq "AcDbBlockReference" (vlax-get obj 'ObjectName)) (setq attlst (CC:AttributesToText (vlax-invoke obj 'GetAttributes))) ) ;; This is primarily intended to catch NUS blocks which ;; the explode method can't handle. (setq lst (vl-catch-all-apply 'vlax-invoke (list obj 'Explode))) (if attlst (setq lst (append lst attlst))) (if (listp lst) (foreach x lst ;; This update call is important! (vla-update x) ;testing (if (eq "AcDbBlockReference" (vlax-get x 'ObjectName)) (CC:ExpNestedBlock x) (progn (if (and (not (vlax-erased-p x)) (eq "0" (vlax-get x 'Layer)) ) (vlax-put x 'Layer lay) ) ;; If color is byblock, change to bylayer. (if (and (not (vlax-erased-p x)) (zerop (vlax-get x 'Color)) ) (vlax-put x 'Color 256) ) (if (and (not (vlax-erased-p x)) (eq "AcDbAttributeDefinition" (vlax-get x 'ObjectName)) ) (vla-delete x) ) ) ) ) ) (vla-delete obj) ) ) ;cond ) ;if ) ;end ;; Allow an object which is not closed, but has equal first and last points, ;; to pass the test. (defun CC:FirstLastPts (obj / p1 p2) (setq p1 (vlax-curve-getPointAtParam obj (vlax-curve-getStartParam obj))) (setq p2 (vlax-curve-getPointAtParam obj (vlax-curve-getEndParam obj))) (equal p1 p2 1e-10) ) (defun CC:GetBlock () (vlax-get (vla-get-ActiveLayout doc) 'Block) ) ;end ;; Convert a list of attribute reference objects to text objects. ;; The list returned is used in CC:ExpNestedBlock. (defun CC:AttributesToText (attlst / elst res) (foreach x attlst (setq elst (entget (vlax-vla-object->ename x))) (if (entmake (list '(0 . "TEXT") (cons 1 (vlax-get x 'TextString)) (cons 7 (vlax-get x 'StyleName)) (cons 8 (vlax-get x 'Layer)) (cons 10 (vlax-get x 'InsertionPoint)) (cons 11 (vlax-get x 'TextAlignmentPoint)) (cons 40 (vlax-get x 'Height)) (cons 41 (vlax-get x 'ScaleFactor)) (cons 50 (vlax-get x 'Rotation)) (cons 51 (vlax-get x 'ObliqueAngle)) (cons 62 (vlax-get x 'Color)) (cons 67 (cdr (assoc 67 elst))) (cons 71 (cdr (assoc 71 elst))) (cons 72 (cdr (assoc 72 elst))) (cons 73 (cdr (assoc 73 elst))) (cons 410 (cdr (assoc 410 elst))) ) ) ;make (setq res (cons (vlax-ename->vla-object (entlast)) res)) ) ) res ) ;end ;; Return T ig block is uniformly scaled within fuzz range. (defun CC:UniformScale (obj / x y z) (and (or (= (type obj) 'VLA-object) (if (= (type obj) 'ENAME) (setq obj (vlax-ename->vla-object obj)) ) ) (or (wcmatch (vlax-get obj 'ObjectName) "*Dimension") (and (= "AcDbBlockReference" (vlax-get obj 'ObjectName)) (setq x (vlax-get obj 'XScaleFactor)) (setq y (vlax-get obj 'YScaleFactor)) (setq z (vlax-get obj 'ZScaleFactor)) (and ;; this fuzz 1e-8 seems sufficient for this application ;; it does not involve transformby which seems more sensitive ;; to NUS blocks (equal (abs x) (abs y) 1e-8) (equal (abs y) (abs z) 1e-8) ) ) ) ) ) ;end ;; Added 7/28/2008 ;; Arguments: ename or vla-object and an intersection point list. ;; Returns: the original point list if an error occurs due to object type. ;; Otherwise the point list sorted by param at point along the curve. ;; Notes: the order of the point list returned by IntersectWith is ;; unpredictable. Sorting the point list allows multiple trim operations ;; on an object to occur in more predictable fashion. (defun SortInterPoints (obj pts / lst) (if (vl-catch-all-error-p (vl-catch-all-apply 'vlax-curve-getEndParam (list obj)) ) pts (progn (setq lst (mapcar '(lambda (y) (vlax-curve-getParamAtPoint obj y)) pts) lst (mapcar '(lambda (y z) (list y z)) lst pts) lst (vl-sort lst '(lambda (a b) (< (car a) (car b)))) ) (mapcar 'cadr lst) ) ) ) ;end ;;;; END SUB-FUNCTIONS ;;;; ;;;; START MAIN FUNCTION ;;;; (vl-load-com) (setq *acad* (vlax-get-acad-object) doc (vla-get-ActiveDocument *acad*) ) (vla-StartUndoMark doc) (setq locked (CC:UnlockLayers doc)) ;; Avoid problems with groups. (setq ps (getvar "pickstyle")) (setvar "pickstyle" 0) (setvar "cmdecho" 0) (setq elev (getvar "elevation")) ;; So the Z value of the point picked (inside or outside) ;; is not at the current elevation. (setvar "elevation" 0.0) (setq osm (getvar "osmode")) (setvar "osmode" 0) ;; polar and ortho should be off too? (setq as (getvar "autosnap")) (setvar "autosnap" 0) (setq om (getvar "orthomode")) (setvar "orthomode" 0) ;; These following added 8/14/2008 (setq emode (getvar "edgemode")) (setvar "edgemode" 0) (setq pmode (getvar "projmode")) (setvar "projmode" 0) (setq offd (getvar "offsetdist")) (sssetfirst) (setq typlst '("AcDbCircle" "AcDbPolyline" "AcDb2dPolyline" "AcDbEllipse" "AcDbSpline")) (setvar "errno" 0) (while (or (not (setq e (car (entsel "\nSelect circle or closed polyline, ellipse or spline for trimming edge: ")))) (not (setq trimobj (vlax-ename->vla-object e))) (not (vl-position (setq typ (vlax-get trimobj 'ObjectName)) typlst)) (and (not (CC:FirstLastPts trimobj)) (setq notclosed T) ) (and (wcmatch typ "*Polyline") (vlax-property-available-p trimobj 'Type) (not (zerop (vlax-get trimobj 'Type))) (setq splinetyp T) ) ;; Test for self-intersecting pline or spline. ;; Concept by Tony Tanzillo. If region fails the object ;; probably intersects itself. Seems reliable so far. (and (wcmatch typ "*Polyline,AcDbSpline") (vl-catch-all-error-p (setq reg (vl-catch-all-apply 'vlax-invoke (list (CC:GetBlock) 'AddRegion (list trimobj)) ) ) ) (setq selfinter T) ) ) (cond ((= 52 (getvar "errno")) (exit) ) ((not e) (princ "\n Missed pick. ") ) (selfinter (princ "\n Selected object intersects itself, try again. ") (setq selfinter nil) ) (notclosed (princ "\n Selected object is not closed, try again. ") (setq notclosed nil) ) (splinetyp (princ "\n Polyline spline selected, try again. ") (setq splinetyp nil) ) (typ (princ (strcat "\n " (substr typ 5) " selected, try again. ")) (setq typ nil) ) ) ) ;; Delete region if one was created. (if (and reg (not (vl-catch-all-error-p reg)) ) (vla-delete (car reg)) ) (setq trimename (vlax-vla-object->ename trimobj)) ;; View to restore at end. (setq curcoord (CC:GetScreenCoords)) ;; Highlighting the trim object helps in crouded situations. (vla-highlight trimobj acTrue) (initget 1) (setq UCSpkpt (getpoint "\nPick point on side to trim: ")) (setq WCStrimobjpts (CC:TraceObject trimobj)) (setq UCStrimobjpts (mapcar '(lambda (x) (trans x 0 1)) WCStrimobjpts) ) (if (CC:Inside UCSpkpt UCStrimobjpts) (setq side "inside") (setq side "outside") ) (setq ext (Extents WCStrimobjpts)) (setq d (distance (car ext) (cadr ext))) ;; d is used below to specify offset distance. (setq d (/ d 1500.0)) ;; testing for decimal units ;; initial test indicates this may be needed ;; An exploded hatch was trimmed better with this. ;; Keep this for now. (if (= 2 (getvar "lunits")) (setq d (/ d 12.0)) ) (setq mark (entlast)) (vl-cmdf "._offset" d (vlax-vla-object->ename trimobj) UCSpkpt "_exit") (setq offsetename (entlast)) (if (/= 1 (length (setq dellst (CC:AfterEnt mark)))) (progn (princ "\nProblem detected with selected object. Try another. Exiting... ") ;; If offset created multiple objects they need to be deleted. ;; This can happen with a spline. ;; Also exit if offset failed. (foreach x dellst (entdel x)) (exit) ) ) (setq offsetobj (vlax-ename->vla-object offsetename)) (vlax-put offsetobj 'Visible 0) (setq hidelst (cons offsetobj hidelst)) (initget "Yes No") (setq delother (getkword (strcat "\nErase all objects " side "? [Yes/No] <N>: "))) (if (not delother) (setq delother "No")) (vlax-invoke *acad* 'ZoomExtents) (setq sc (CC:GetScreenCoords)) ;; These are 2D points. (setq minpt (car sc)) (setq maxpt (cadr sc)) ;; This must follow zoom extents. (vlax-put trimobj 'Visible 0) (setq hidelst (cons trimobj hidelst)) ;; Explode blocks which intersect the trim object first. ;; Deal with hatches and regions afterwards. ; (setq sscross (ssget "cp" UCStrimobjpts '((0 . "INSERT")))) (setq sscross (ssget "_cp" UCStrimobjpts '((0 . "INSERT")))) ; (if (not (setq ssinside (ssget "wp" UCStrimobjpts '((0 . "INSERT"))))) (if (not (setq ssinside (ssget "_wp" UCStrimobjpts '((0 . "INSERT"))))) (setq ssinside (ssadd)) ) (setq i 0) (if sscross (repeat (sslength sscross) (setq e (ssname sscross i)) (if (and (not (ssmemb e ssinside)) (setq o (vlax-ename->vla-object e)) (not (vlax-erased-p o)) (vlax-property-available-p o 'Path) ) (progn ;; Hiding true xrefs here. If the block was not ;; erased/explode above then hide it. The reason for ;; this nonsense method is sometimes after an xref ;; is bound, AutoCAD thinks it is still an xref. ;; There's no way to test for this condition AFAIK. ;; (Command "explode"...) can explode a false xref. ;; So this cond passes all xref blocks to the ;; CommandExplode function. If it fails to explode ;; then make the xref invisible. Note, there will be a ;; non-fatal message generated within the CommandExplode ;; function when the block is really an xref. ;; "The object is an external reference." ;; Just have to live with that. ;; Also, the explode method cannot be used on false xrefs. ;; The reason for attention to this problem is the user ;; may bind xrefs before running the routine. (CC:CommandExplode o) (if (not (vlax-erased-p o)) (progn (vlax-put o 'Visible 0) (setq hidelst (cons o hidelst)) ) ) ) ;else (CC:ExpNestedBlock o) ) (setq i (1+ i)) ) ) ;; Solid hatches... (setq i 0 sscross nil ssinside nil) ; (setq sscross (ssget "cp" UCStrimobjpts '((0 . "HATCH")))) (setq sscross (ssget "_cp" UCStrimobjpts '((0 . "HATCH")))) ; (if (not (setq ssinside (ssget "wp" UCStrimobjpts '((0 . "HATCH"))))) (if (not (setq ssinside (ssget "_wp" UCStrimobjpts '((0 . "HATCH"))))) (setq ssinside (ssadd)) ) ;; Just check for solid hatces. (if sscross (repeat (sslength sscross) (setq e (ssname sscross i)) (if (and (not (ssmemb e ssinside)) (setq o (vlax-ename->vla-object e)) (eq "AcDbHatch" (vlax-get o 'ObjectName)) (eq "SOLID" (vlax-get o 'PatternName)) ) (setq solidflag T solidlst (cons e solidlst) ) ) (setq i (1+ i)) ) ) ;if (if solidflag (progn (initget "Yes No") (setq solidans (getkword "\nConvert solid hatch to lines? [Yes/No] <N>: ")) (if (eq "Yes" solidans) (foreach x solidlst ;; check for erased? (command "._-hatchedit" x "_properties" "ANSI31" (* d 8) 0.0) ;; Prevent message, "Hatch boundary associativity removed." (vlax-put (vlax-ename->vla-object x) 'AssociativeHatch 0) (command "._explode" x) ) ) ) ) ;; Now regions and not solid hatches. (setq i 0 sscross nil ssinside nil) ; (setq sscross (ssget "cp" UCStrimobjpts '((0 . "HATCH,REGION")))) (setq sscross (ssget "_cp" UCStrimobjpts '((0 . "HATCH,REGION")))) ; (if (not (setq ssinside (ssget "wp" UCStrimobjpts '((0 . "HATCH,REGION"))))) (if (not (setq ssinside (ssget "_wp" UCStrimobjpts '((0 . "HATCH,REGION"))))) (setq ssinside (ssadd)) ) ;; Ignore solid hatches. If any still exist the user answered No to question. (if sscross (repeat (sslength sscross) (setq e (ssname sscross i)) (if (and (not (ssmemb e ssinside)) (not (vl-position e solidlst)) ) (progn ;; Prevent message, "Hatch boundary associativity removed." (setq o (vlax-ename->vla-object e)) (if (vlax-property-available-p o 'AssociativeHatch) (vlax-put o 'AssociativeHatch 0) ) (command "._explode" e) ) ) (setq i (1+ i)) ) ) (setq sscross nil ssinside nil) ;; Note: xrefs and the trim object are invisible at this point ;; so they are not included in following selections. ; (setq ssall (ssget "c" minpt maxpt)) (setq ssall (ssget "_c" minpt maxpt)) ;; Selection set of objects completely inside trimobj. ; (if (not (setq ssinside (ssget "wp" UCStrimobjpts))) (if (not (setq ssinside (ssget "_wp" UCStrimobjpts))) (setq ssinside (ssadd)) ) ;; Selection set of all objects crossing trimobj. ; (if (not (setq sscross (ssget "cp" UCStrimobjpts))) ;var added (if (not (setq sscross (ssget "_cp" UCStrimobjpts))) ;var added (setq sscross (ssadd)) ) ;; now ssoutside can be set (setq i 0) (setq ssoutside (ssadd)) (repeat (sslength ssall) (setq e (ssname ssall i)) (if (not (ssmemb e sscross)) (ssadd e ssoutside) ) (setq i (1+ i)) ) ;; ssintersect - objects which intersect the trim object. (setq i 0) (setq ssintersect (ssadd)) (repeat (sslength sscross) (setq e (ssname sscross i)) (if (and (not (ssmemb e ssinside)) (not (vl-position e solidlst)) ;; Added intersect test 8/7/2008. ;; Was removed, put back 8/19/2008. Seems OK. ;; If the following returns nil then trim will fail. ;; "Cannot TRIM this object." This can happen with ;; some unusual spline objects. (CC:GetInters e trimobj acExtendNone) ;(not (eq e trimename)) ) (ssadd e ssintersect) (ssadd e ssinside) ) (setq i (1+ i)) ) ;; Added check 8/22/2008. ;; Likely only applies to an ellipse as trim object. ;; An ellipse is converted to a spline when offset. ;; For some unknown reason the trim object may be ;; included in the objects which are erased. It should not ;; happen since the trim object is invisible as this point. ;; Regardless, this check fixes a bug which may cause the ;; trim object to be erased. Which in turn causes other problems. (if (eq "Yes" delother) (cond ((eq side "inside") (ssdel trimename ssinside) ;check (command "._erase" ssinside "") ) ((eq side "outside") (ssdel trimename ssoutside) ;check (command "._erase" ssoutside "") ) ) ) ;; List of VLA-objects which intersect the trim object. (setq lst (CC:SSVLAList ssintersect)) ;; Remove these object types from list to trim. ;; There is error checking elsewhere which should prevent ;; errors with other object types which cannot be trimmed. ;; Note 8/17/2008 - the only hatches which still exist are ;; solid hatches which the user chose not to convert to lines. ;; So hatches can be added here. (setq lst (vl-remove-if '(lambda (x) (setq typ (vlax-get x 'ObjectName)) (or (eq "AcDbText" typ) (eq "AcDbMText" typ) (eq "AcDbLeader" typ) (wcmatch typ "*Dimension") (eq "AcDbHatch" typ) ;; added 8/17/2008 (eq "AcDbSolid" typ) (eq "AcDbTrace" typ) (eq "AcDbMLeader" typ) ;; Likely not needed, Added 8/22/2008. (eq trimobj x) ) ) lst ) ) (CC:ZoomToPointList WCStrimobjpts) ;;; Start primary loop ;;; (foreach x lst ;; Helps with trimming closed plines. (if (not (vlax-erased-p x)) (progn (setq typ (vlax-get x 'ObjectName)) (cond ((and (eq "AcDbPolyline" typ) (= -1 (vlax-get x 'Closed)) ) (vlax-put x 'Closed 0) (setq coord (vlax-get x 'Coordinates)) (vlax-put x 'Coordinates (append coord (list (car coord) (cadr coord))) ) (vla-update x) ) ((and (eq "AcDb2dPolyline" typ) (= -1 (vlax-get x 'Closed)) ) (vlax-put x 'Closed 0) (setq coord (vlax-get x 'Coordinates)) (vlax-put x 'Coordinates (append coord (list (car coord) (cadr coord) (caddr coord))) ) (vla-update x) ) ) ) ) (if (setq intpts (CC:GetInters offsetobj x acExtendNone)) (progn ;; More than two points seems good here and below. (if (> (length intpts) 2) (setq intpts (SortInterPoints x intpts)) ) (foreach p intpts (setq mark (entlast)) (if (and (not (vl-catch-all-error-p (vl-catch-all-apply 'vlax-curve-getParamAtPoint (list x p))) ) (vlax-curve-getParamAtPoint x p) ) (vl-cmdf "._trim" trimename "" (list (vlax-vla-object->ename x) (trans p 0 1)) "") ) (if (not (eq mark (entlast))) (setq postlst (cons (entlast) postlst)) ) ) ) ) ) ;;; End primary loop ;;; ;; This part trims any new objects created above. (while postlst (setq intpts nil) (foreach x postlst (if (setq intpts (CC:GetInters offsetobj x acExtendNone)) (progn (if (> (length intpts) 2) (setq intpts (SortInterPoints x intpts)) ) (foreach p intpts (setq mark nil) ; is this needed? (setq mark (entlast)) (if (and (not (vl-catch-all-error-p (vl-catch-all-apply 'vlax-curve-getParamAtPoint (list x p))) ) (vlax-curve-getParamAtPoint x p) ) (vl-cmdf "._trim" trimename "" (list x (trans p 0 1)) "") ) (setq postlst (vl-remove x postlst)) (if (not (eq mark (entlast))) (setq postlst (cons (entlast) postlst)) ) ) (setq postlst (vl-remove x postlst)) ) (setq postlst (vl-remove x postlst)) ) ) ) ;; Following code added in version 1.2 which deals with left over ;; objects either inside or outside the trim object which should be erased. (if (and (eq "Yes" delother) trimobj offsetobj (not (CC:GetInters offsetobj trimobj acExtendNone)) ) (cond ((and (eq side "inside") (setq WCSoffsetobjpts (CC:TraceObject offsetobj)) (setq UCSoffsetobjpts (mapcar '(lambda (x) (trans x 0 1)) WCSoffsetobjpts) ) ) (if (setq sstest (ssget "_cp" UCSoffsetobjpts)) (command "._erase" sstest "") ) ) ((eq side "outside") (setq mark (entlast)) ;; multiply be 2 or 3? (vl-cmdf "._offset" (* d 3) offsetename UCSpkpt "_exit") (if (and (not (eq mark (setq testename (entlast)))) (not (CC:GetInters testename trimobj acExtendNone)) (setq WCSoffsetobjpts (CC:TraceObject testename)) (setq UCSoffsetobjpts (mapcar '(lambda (x) (trans x 0 1)) WCSoffsetobjpts) ) ) (progn (setq sskeep (ssget "_wp" UCSoffsetobjpts)) (vlax-invoke *acad* 'ZoomExtents) (setq sc (CC:GetScreenCoords) minpt (car sc) maxpt (cadr sc) sstest (ssget "_c" minpt maxpt) i 0 ) (if (and sskeep sstest (> (sslength sstest) (sslength sskeep)) ) (repeat (sslength sstest) (setq e (ssname sstest i)) (if (not (ssmemb e sskeep)) (entdel e) ) (setq i (1+ i)) ) ) ) ) ) ) ;cond ) ;if ;; Zoom to original view. (command "._zoom" "_window" (car curcoord) (cadr curcoord)) (*error* nil) ) ;end ;------------------------------------ ;shortcut (defun c:CC () (c:CookieCutter2)) ;------------------------------------

Hello Au pif : -- Tu peux essayer : ROLLOVERTIPS = 0 -- As tu essayer de mettre la ligne de commande / texte en mode ANCREE sous la zone graphique ? Bye, lecrabe

Hello Les Jeunots Mais Christian REB @rebcao avait lui aussi realise un joli catalogue de hachures ! Bye, lecrabe

Hello @LeGritche Magnifique et ton PDF/DWG me semble un peu inspire de celui que j avais fourni ! Tu as bien raison, c Tip-Top d avoir un exemple avec le Nom et l Echelle !! Bon We, La Sante, Bye, lecrabe

Hello @(gile) OUI je pense que (pour la plupart des Users) il vaut mieux avoir un AutoCAD LT 2024 Windows que un AutoCAD 2024 Full Mac ! Sauf si on a besoin de la 3D d AutoCAD !? Bon WE, La Sante, Bye, lecrabe

Hello Alors pour ceux qui sont passionnes par les XDATAs ! Apres la routine "MODIF_XDATA" de Bruno / Bonuscad voici la routine "XDA" de Gilles pour voir en case de dialogue DCL (aucune Modif possible) le contenu des XDATAs Bonne journee, Bye, lecrabe ;; ;; XDA par Gilles ;; ;; Affiche une boite de dialogue DCL qui liste les donnees etendues de l objet selectionne ;; ;; Commande au clavier : XDA ;; (defun c:xda (/ xd-box tmp file dcl_id ent dlst) (defun xd-box (dlst) (setq tmp (vl-filename-mktemp "Tmp.dcl") file (open tmp "w") ) (write-line "XdBox:dialog{label=\"Donnees Etendues (XDATA) \";" file ) (foreach l dlst (write-line (strcat ":boxed_column{label=" (vl-prin1-to-string (car l)) ";" ) file ) (foreach p (cdr l) (write-line (strcat ":edit_box{label=\"" (cond ((= 1000 (car p)) "1000 Chaine : ") ((= 1002 (car p)) "1002 Accolade : ") ((= 1003 (car p)) "1003 Calque : ") ((= 1004 (car p)) "1004 Binaire : ") ((= 1005 (car p)) "1005 Maintient : ") ((= 1010 (car p)) "1010 Point : ") ((= 1011 (car p)) "1011 Position : ") ((= 1012 (car p)) "1012 Deplacement : ") ((= 1013 (car p)) "1013 Direction : ") ((= 1040 (car p)) "1040 Reel : ") ((= 1041 (car p)) "1041 Distance : ") ((= 1042 (car p)) "1042 Echelle : ") ((= 1070 (car p)) "1070 Entier 16 bits : ") ((= 1071 (car p)) "1071 Entier 32 bits : ") ) "\";value=\"" (vl-princ-to-string (cdr p)) "\";edit_width=30;}" ) file ) ) (write-line "}" file) ) (write-line "spacer;ok_only;}" file) (close file) (setq dcl_id (load_dialog tmp)) (if (not (new_dialog "XdBox" dcl_id)) (exit) ) (start_dialog) (unload_dialog dcl_id) (vl-file-delete tmp) ) (if (and (setq ent (car (entsel))) (setq dlst (cdr (assoc -3 (entget ent '("*"))))) ) (xd-box dlst) (alert "Cet objet ne comporte pas de Donnees Etendues (XDATA) ! ") ) (princ) )

Hello Un lien grosfichier / wetransfert / download free / etc, cela permettra deja de recuperer ton fichier ... Bye, lecrabe

Hello @didier Je t ai envoye les Routines Lisp qui traitent les XDATAs ... Quand je passe vers Niort, cela te coutera un excellent Cognac ! La Sante, Bye, lecrabe

Hello @JPhil @DenisHen Alors comme deja signale par mon mon message No 2 : -- DYN_READ_XDATA de Bonuscad pour voir en Infobulle les XDATAs = OK -- MODIF_XDATA de Bonuscad pour modifier le contenu des XDATAs = OK -- XDA de Gilles pour voir (en case de dialogue) le contenu des XDATAs = OK -- COPY_XD de Gilles pour copier les XDATAs (IDEM le "Pinceau") = OK -- XDLIST d Autodesk pour afficher sur Ecran texte les XDATAs = OK MAIS la routine "XDATA" d Autodesk pour creer des XDATAs ne marche pas car appel a la fonction "ACET-STR-FORMAT" des Express/Bonus Tools NOTE 1 : la routine de Bonuscad "MODIF_XDATA" (qui est OK) est en PUR Lisp ! NOTE 2 : INPUTXDATA de Gilles qui attache a UNE entite selectionnee UN texte tape au clavier = OK - Car PUR Lisp Donc il faut que je teste avec d autres Lisp sur les XDATAs, je completerais CE message ... Bye, lecrabe ;; Par Bonuscad - MODIF_XDATA.lsp ;; http://www.cadxp.com/modules.php?op=modload&name=XForum&file=viewthread&tid=31123#pid134134 (defun c:modif_xdata ( / js ent xd_list e_data el msg what new nw_data) (setq namapp (getstring "\nNom de l'application ?: ")) (while (not (setq js (ssget "_+.:E:S" (list '(0 . "*") (cons -3 (list (list namapp)))))))) (setq ent (entget (ssname js 0) (list namapp)) xd_list (cdr (assoc -3 ent)) e_data (cdr (car xd_list)) el '(0) ) (repeat (1- (length e_data)) (setq el (cons (1+ (car el)) el))) (setq msg "") (initget (foreach n (setq el (mapcar 'itoa el)) (setq msg (strcat n " " msg)))) (setq msg "") (setq msg (strcat "\nElément à modifier? [" (foreach n el (setq msg (strcat n "/" msg))) "]")) (print e_data) (setq what (getkword msg)) (princ "\nRemplacer ") (princ (cdr (nth (atoi what) e_data))) (princ " par -> ") (cond ((member (car (nth (atoi what) e_data)) '(1000 1003 1005)) (setq new (cons (car (nth (atoi what) e_data)) (getstring " nouvelle chaine: "))) ) ((member (car (nth (atoi what) e_data)) '(1040 1041 1042)) (initget 1) (setq new (cons (car (nth (atoi what) e_data)) (getreal " nouvelle valeur réelle: "))) ) ((member (car (nth (atoi what) e_data)) '(1070 1071)) (initget 1) (setq new (cons (car (nth (atoi what) e_data)) (getint " nouvelle valeur entière: "))) ) ((member (car (nth (atoi what) e_data)) '(1010 1011 1012 1013)) (initget 1) (setq new (cons (car (nth (atoi what) e_data)) (getpoint " nouveau vecteur: "))) ) (T (princ "\nNe peut changer ce type d'élément !") (setq new (nth (atoi what) e_data)) ) ) (setq nw_data '()) (foreach n el (if (eq n what) (setq nw_data (cons new nw_data)) (setq nw_data (cons (nth (atoi n) e_data) nw_data)))) (entmod (append (entget (ssname js 0)) (list (cons -3 (list (cons (caar xd_list) nw_data)))))) (prin1) )

Hello https://help.autodesk.com/view/RVT/2024/FRA/?guid=GUID-C81929D7-02CB-4BF7-A637-9B98EC9EB38B Bye, lecrabe

Hello @DenisHen @didier @Olivier Eckmann Je dirais plutot ... *** Option A *** -- 1/2/3 AutoCAD MAP (avec / sans Covadis) pour les gens dans le VRD / Topo ... -- Ou 1/2/3 Covadis v18 sur 1/2/3 AutoCAD MAP OEM de Geomedia puis -- N licences de AutoCAD LT 2024 Windows -- ou N licences ZWCAD (700 Euros la licence permanente) / ZWCAD Pro (1100 Euros la licence permanente) *** Option B *** -- 1/2 AutoCAD LT 2024 Windows pour construire / modifier les Blocs dynamiques -- et N licences ZWCAD (700 Euros la licence permanente) / ZWCAD Pro (1100 Euros la licence permanente) RAPPEL : ZWCAD peut utiliser les Blocs dynamiques mais ne peut pas les creer ! ( Car la licence sur les Blocs dynamques d'Autodesk cours jusqu en 2026 ) Bye, lecrabe

Hello @fabcad @Fraid @Megeon @rebcao @Tramber @didier @bonuscad @Olivier Eckmann @Curlygoth @GEGEMATIC @Eric @(gile) @DenisHen @Flobott @Luna @Oli553 @Steven @philsogood @vincentp010 @lili2006 @Vincent P. @VDH-Bruno @JPhil J ai mis a jour mon message No 2 (voir au debut) avec des Infos fort interessantes de Vladimir Michl La Sante, Bye, lecrabe