Modification of the Display Format for a Voltage or Current Channel
(Original Document)
About us
At a Glance
This parameter defines the measurement display format for an analog module channel, for which the range is configured in voltage or current.
The display format can be:
Procedure
The table below shows the procedure for defining the scale assigned to an analog module channel.
Step
Action
1
Access the hardware configuration screen of the required module.
2
Click in the cell of the Scale column of the channel to set.
Result: the Channel Parameters dialog box appears:
3
Enter the values to assign to the channel into one of the two Display boxes in the Scale area.
4
Validate the choice by closing the dialog box.
Note: if the default values have been selected (standardized display), the corresponding cell in the Scale area shows %. Otherwise it will show User (user display).
5
Validate the modification by clicking Edit → Confirm.