Powering Up Modules Without a Downloaded Application

140CRP31200 IP Address

In the absence of an application, the 140CRP31200 remote I/O head module uses the that is based on the MAC address printed on the front of the module. You can configure the IP address in Control Expert as detailed in the Quantum EIO Remote I/O Modules Installation and Configuration Guide when you have downloaded an application.

•••CRA312•0 IP Address

In the absence of an application, the •••CRA312•0 remote I/O adapter module unsuccessfully requests an IP address from the 140CRP31200 head module. The adapter module then requests an IP address from the MAC address printed on the front of the module. The module continues in this cycle because it does not have a valid configuration. This Not Configured state is indicated by the LED display on the front of the module. There are no exchanges with the PLC. Physical outputs of I/O modules in the are in the fallback state (output forced at 0).

remote I/O drop

One of the 3 types of remote I/O devices in an Ethernet remote I/O network. A remote I/O drop is a Quantum or an X80 rack of I/O modules that are connected to an Ethernet remote I/O network and managed by an Ethernet remote adapter module. A drop can be a single rack or a rack with an extension rack.