Output Scaling
(Original Document)
About us
Description
This function is used to scale the output to the calculated command.
The scaling function is optional. It is used to select the scale according to specific outputs.
If this function is used, it introduces a scale factor. It performs the following calculation.
Function Parameters
Input Parameters:
Parameter
Symbol
Type
Thresholds
Default Value
R/W
Command Value
OUT_MAN
REAL
-3.4E38 / 3.4E38
/
R
Command value (*)
OUTi
REAL
-3.4E38 / 3.4E38
/
R
(*) Hot/Cold or Split Range case
Internal Parameters:
Parameter
Symbol
Type
Thresholds
Default Value
R/W
Lower Scale
OUT_INFi
REAL
-3.4E38 / 3.4E38
0.0
R/W
Upper Scale
OUT_SUPi
REAL
-3.4E38 / 3.4E38
100.0
R/W
NOTE: In the configuration editor, the symbols OUT_INF and OUT_SUP are called Lower limit (%) and Upper limit (%).
Output Parameter:
Parameter
Symbol
Type
Thresholds
Default Value
R/W
Command value
OUT_MAN
REAL
-3.4E38 / 3.4E38
/
R
Execution Monitoring
The monitoring the parameters of this function is built into the error management of the output branch.