This bit (status 1) indicates that the drive is ignoring the controller's motion profile while it performs a special operation (for example, reference point, FastStop, or Stop).
NOTE: This bit is not available on all SERCOS® drives.
Applied to Real Axis Function
Controller inhibited while drive performs a special operation.
Applied to Imaginary Axis Function
The bit is set to 1 if the axis is disabled and it is set to 0 if the axis is enabled.
Applied to the Group of Co-ordinated Axes, Group of Slave Axes or SERCOS® Ring Functions
This bit is set to 1 if one or more member axis AXIS_NOT_FOLLOWING bits are set to 1.
