Certified Modules

The M580 safety PAC is a safety-related system certified by TÜV Rheinland Group, according to:

  • SIL3 / IEC 61508 / IEC 61511

  • SIL4 / EN 50128 (IEC 62279), EN 50129 (IEC 62245), EN 50126 (IEC 62278)

  • SIL CL3 / IEC 62061

  • PLe, Cat. 4 / ISO 13849-1

  • CIP Safety IEC 61784-3

It is based on the M580 family of programmable automation controllers (PACs). The following Schneider Electric M580 safety modules are certified:

  • BMEP582040S standalone CPU

  • BMEP584040S standalone CPU

  • BMEP586040S standalone CPU

  • BMEH582040S Hot Standby CPU

  • BMEH584040S Hot Standby CPU

  • BMEH586040S Hot Standby CPU

  • BMEP58CPROS3 co-processor

  • BMXSAI0410 analog input module

  • BMXSDI1602 digital input module

  • BMXSDO0802 digital output module

  • BMXSRA0405 digital relay output module

  • BMXCPS4002S power supply

  • BMXCPS4022S power supply

  • BMXCPS3522S power supply

NOTE: In addition to the safety modules listed above, you can also include non-interfering, non-safety modules in your safety project.
NOTE: The Modicon Safety offer is up to SIL3 (reg. IEC 61508) and PLe (reg. ISO 13849) capable, meaning it is also SIL1/SIL2 and PLa, b,c,d capable.
NOTE:

  • Each time in the document is mentioned SIL2 or SIL3 without a standard reference this is regarding IEC 61508 / IEC 61511.

  • Each time SIL2 is mentioned, it is also SIL3 regarding EN 50126 / EN 50128 / EN 50129.

  • Each time SIL3 is mentioned, it is also SIL4 regarding EN 50126 / EN 50128 / EN 50129.

You can find the most recent information on the certified product versions on the TÜV Rheinland Group website: www.certipedia.com or www.fs-products.com.

Replacing a CPU

It is possible to replace a BME•58•040S CPU with another BME•58•040S. However, the replacement does not work if the following limitations are exceeded :

  • number of I/O

  • number of I/O drops

  • number of variables

  • application memory size

Refer to the topics: