At a Glance
During installation of Control Expert, three drivers can be optionally installed:
Uni-Telway
Modbus
USB
If selected, the three drivers are installed. One driver cannot be installed without the others being installed.
These drivers provide the link between the workstation and the PLC. The driver to be used is selected in Control Expert.
Normally, it is not necessary to change the configuration of the installed drivers. In exceptional cases use the Drivers Manager to reconfigure a driver or install a new drivers from Communication Drivers directory on the Control Expert DVD-ROM.
For information about drivers installations and configurations, refer to the SetupDrv.pdf in your language in the Communication Drivers directory.
Launching the Drivers Manager
To launch the Drivers Manager execute the command:
.