Mounting Jumper Clips
Original instructions
About us
Overview
Terminal strip jumper clips are installed when contiguous I/O points need to be jumpered (for example, on the 140 AVO 020 00 analog out put module).
Mounting Jumper Clips
The following steps describe the mounting of jumper clips.
Step
Action
1
Remove the power.
2
Remove the Terminal Strip from the module.
Front view: 
1
Jumper clip 
2
Terminal Strip I/O screw 
3
Inserted jumper clip (exploded view)
3
Loosen the terminal strip I/O screws of the points that you want jumpered.
4
Insert the jumper clip under the loosened screws (see exploded view).
5
Tighten the screws and reinstall the module.