Physical description of the module mounting plate

At a Glance

Each TSX SUP 10x1 power supply module is supplied pre-mounted on a support plate used to fix the module: either to a DIN AM1-DE200 or AM1-DP200 mounting rail, or to a Telequick AM1-PA mounting grid.

Each mounting grid can accommodate: either a single TSX SUP 1021 or TSX SUP 1051 module, or either one or two TSX SUP 1011 modules.

Illustration

Diagram and numbers:

Number table

The following table provides descriptions for the items numbered in the above diagram:

Numbers	Description
1	Three 5.5 mm diameter holes for fixing the module support to an AM1-PA mounting grid or plate with a 140 mm center distance (mount center distance for TSX 37 PLCs).
2	Four 6.5 mm diameter holes for fixing the module support to an AM1-PA mounting grid or plate with a 88.9 mm center distance (mount center distance for TSX 57 PLCs).
3	Two M4 holes for attaching the TSX SUP 1011/1021/1051 power supply module(s).
4	Recesses to anchor the pins at the bottom and the rear of the module.