Downloading a New NOE Kernel
Original instructions
About us
Procedure
The NOE Executive (Exec) adds a new feature that allows updating of the low level Kernel within the NOE module’s firmware. For the proper installation of new kernel firmware, use the following procedure.
Step
Action
1
Check the current version of the NOE module’s Executive firmware (Exec file).
2
If the Exec is not the appropriate version, the Exec must be updated before updating the Kernel.
3
Use the EXECLoader to load the latest version of the EXEC.
4
After loading the new Exec and before loading the Kernel, make sure to cycle power to the NOE module.
5
Load the Kernel using the EXECLoader.
6
After the transfer displays as Successful, the NOE module needs approximately 1 minute to burn the new Kernel into its Flash memory.
7
The NOE module goes go through a reboot sequence.
Kernel Version
CAUTION
UNINTENDED EQUIPMENT OPERATION
Failure to perform the preceding update procedure will render the NOE module inoperable.
Failure to follow these instructions can result in injury or equipment damage.
The NOE Kernel can not be downloaded via FTP.
Please check the current NOE Kernel version on the NOE Properties Web page.
Follow these links: | Diagnostics | NOE Properties |