|
Specifications
|
|
|
Original instructions
|
|
Specifications
|
|
|
Original instructions
|
|
Module Type
|
4 Channel OUT
|
|
External Power
|
Not required
|
|
Bus Current required (Module)
|
700 mA
|
|
Power Dissipation
|
4.5 W max.
|
|
I/O map
|
4 output words
|
|
Error Detection
|
None
|
|
Wiring length
|
400 m max.
|
|
Voltages (Bipolar)
|
+/- 10 VDC (Min. load resistance = 1 kohms)
+/- 5 VDC (Min. load resistance = 500 ohms)
|
|
Voltages (Unipolar)
|
0 ...10 VDC (Min. load resistance = 1 kohms)
0 ... 5 VDC (Min. load resistance = 500 ohms)
|
|
Output Current
|
+/- 10 mA max. (any range)
Outputs are shortcut proof
|
|
Source Resistance
|
0.1 ohms
|
|
Resolution
|
12 bit
|
|
Accuracy Error @ 25 degrees C
|
+/- 0.15% of full scale
|
|
Linearity
|
+/- 1 LSB
|
|
Unipolar Ranges
|
Typical: 0.003% of full scale / degrees C
Maximum: 0.005% of full scale / degrees C
|
|
Bipolar Ranges
|
Typical: 0.004% of full scale / degrees C
Maximum: 0.007% of full scale / degrees C
|
|
Max. Settling Time
|
700 μs to +/- 0.1% of the final value
|
|
Update Time
|
3 ms for all channels
|
|
Channel to Bus
|
1780 VAC rms for 1 minute
|
|
Channel to Channel
|
500 VAC rms for 1 minute
|
|
Internal
|
Not required
|
|
External
|
An external fuse is required on the master override signal when it is connected to an external source. The required fuse is 1/16 A or 0.063 A fuse:
Fuse Type: 3 AG Fast acting 1/16 A, 250 V
Fuse Holder: 3 AG Fuse type
The external fuse is not required if master override is connected to common
|
