How to Modify the Filtering Parameter of a Discrete Input Module

At a Glance

This parameter defines the filtering period for the channel selected.

The default values are: 0.1 to 7.5 ms in 0.5 ms increments.

NOTE: Module filtering modification is possible in online mode.

Procedure

The following table shows how to define the Filtering parameter.

Step	Action
1	Open the desired module configuration screen.
2	Click on the arrow of the drop-down menu of the channel to be configured located in the Filter column. Result: The following list appears:
3	Select the desired filtering time.
4	Confirm the modification with the Edit → Validate menu command.