How to configure the combined input IEna/Q2 (TSX CTY2C)
(Original Document)
At a Glance
This parameter defines the use of this combined input/output:
These parameters are set in the Enable on IEna or Q2 output zone in the configuration screen.
Procedure
The table below summarizes the procedure for configuring the combined input/output IEna / Q2 of the TSX CTY2C module.
Step
Action
1
Open the module to be configured.
2
In the channel field: select the counter (i.e. the channel) concerned.
3
In the general parameters field: select the counting function and the task.
Result: the configuration screen appears.
4
In the Enable on IEna or Q2 output zone, click on the button corresponding to the required option.
5
Configuration of the combined input/output IEna/Q2 is complete.
If there are no more parameters to configure, enable the new configuration. To do this:
  • scroll down the Edit menu and select the Enable command.