How to configure event processing
(Original Document)
At a Glance
This parameter is used to associate event processing to the counting channel.
This configuration is defined in the Event zone of the configuration screen.
Procedure
The table below summarizes the procedure for configuring event processing for all TSX CTY2A, 4A and 2C modules.
Step
Action
1
Open the module to be configured.
2
In the channel field: select the counter (i.e. the channel) concerned.
3
In the general parameters field: select the counting function and the task.
Result: the configuration screen appears
4
In the Event zone, check the EVT box.
5
Select the number of the event task which is associated to the counting channel (this task must then be programmed).
6
Configuration of the event processing is complete.
If there are no more parameters to configure, enable the new configuration. To do this:
  • scroll down the Edit menu and select the Enable command.