EtherNet/IP Detected Error Codes
EtherNet/IP hexadecimal detected error codes include:
Detected Error Code (hex) |
Description |
---|---|
800D |
Timeout on the explicit message request |
8012 |
Bad device |
8015 |
Either:
|
8018 |
Either:
|
8030 |
Timeout on the Forward_Open request |
Note: The following 81xx detected errors are Forward_Open response detected errors that originate at the remote target and are received via the CIP connection. |
|
8100 |
Connection in use or duplicate Forward_Open |
8103 |
Transport class and trigger combination not supported |
8106 |
Ownership conflict |
8107 |
Target connection not found |
8108 |
Invalid network connection parameter |
8109 |
Invalid connection size |
8110 |
Target for connection not configured |
8111 |
RPI not supported |
8113 |
Out of connections |
8114 |
Vendor ID or product code mismatch |
8115 |
Product type mismatch |
8116 |
Revision mismatch |
8117 |
Invalid produced or consumed application path |
8118 |
Invalid or inconsistent configuration application path |
8119 |
Non-Listen Only connection not opened |
811A |
Target object out of connections |
811B |
RPI is smaller than the production inhibit time |
8123 |
Connection timed out |
8124 |
Unconnected request timed out |
8125 |
Parameter detected error in unconnected request and service |
8126 |
Message too large for unconnected_send service |
8127 |
Unconnected acknowledge without reply |
8131 |
No buffer memory available |
8132 |
Network bandwidth not available for data |
8133 |
No consumed connection ID filter available |
8134 |
Not configured to send scheduled priority data |
8135 |
Schedule signature mismatch |
8136 |
Schedule signature validation not possible |
8141 |
Port not available |
8142 |
Link address not valid |
8145 |
Invalid segment in connection path |
8146 |
Detected error in Forward_Close service connection path |
8147 |
Scheduling not specified |
8148 |
Link address to self invalid |
8149 |
Secondary resources unavailable |
814A |
Rack connection already established |
814B |
Module connection already established |
814C |
Miscellaneous |
814D |
Redundant connection mismatch |
814E |
No more user-configurable link consumer resources: the configured number of resources for a producing application has reached the limit |
814F |
No more user-configurable link consumer resources: there are no consumers configured for a producing application to use |
8160 |
Vendor specific |
8170 |
No target application data available |
8171 |
No originator application data available |
8173 |
Not configured for off-subnet multicast |
81A0 |
Detected error in data assignment |
81B0 |
Optional object state detected error |
81C0 |
Optional device state detected error |
Note: All 82xx detected errors are register session response detected errors. |
|
8200 |
Target device does not have sufficient resources |
8208 |
Target device does not recognize message encapsulation header |
820F |
Reserved or unknown detected error from target |