Examples of using the segment activation and deactivation commands
(Original Document)
About us
Activation of an IBS segment
The action is performed on the 6.0 device situated after the bus terminal block.
The following figure shows an example of a segment activation command.
The following table describes the coding of data of the function.
Parameters
Variables
Values
Address
-
ADDR(‘0.4.0.SYS’)
Request code
-
16#0083
Data to be sent
%KW20:10
16#1807
16#0500
16#0000
16#FF00
10 (decimal)
16#0713
16#0003
16#0001
16#0001
16#0600
Report
%MW20:4
-
Reception zone
%MW25:4
-
CAUTION
UNEXPECTED APPLICATION BEHAVIOR - REFRESHING DELAY OF I/Os
During the period from 200 to 300 ms, the inputs are not refreshed and the outputs are maintained in their state.
Failure to follow these instructions can result in injury or equipment damage.
Deactivation of an IBS segment
The action is performed on the 6.0 device situated after the bus terminal block.
The following figure shows an example of a segment deactivation command.
The following table describes the coding of data of the function.
Parameters
Variables
Values
Address
-
ADDR(‘0.4.0.SYS’)
Request code
-
16#0083
Data to be sent
%KW40:10
16#1807
16#0500
16#0000
16#FF00
10 (decimal)
16#0713
16#0003
16#0000
16#0001
16#0600
Report
%MW40:4
-
Reception zone
%MW45:4
-