Miscellaneous Device Compatibilities
(Original Document)
About us
At a Glance
The following compatibility information concerns:
Address Range
The table below shows the Fipio address range a device can use depending on the type of processor used:
Type of device
Type of processor
TSX P57 154
TSX P57 254/354
TSX P57 454/554
Advantys STB
1...62
1...62, 64...127
1...62, 64...127
Altivar (ATV-38/58/58F/68)
1...62
1...62
1...62
Analog TBX (AES, AMS, ASS)
1...62
1...62, 64...127
1...62, 64...127
Gateway (TBX SAP 10)
1...62
1...62, 64...127
1...62, 64...127
Inductel
1...62
1...62
1...62
Lexium
1...62
1...62
1...62
Magelis
1...62
1...62
1...62
Momentum
1...62
1...62, 64...99
1...62, 64...99
Standard profiles (FED, FDR, FSD)
1...62
1...62, 64...127
1...62, 64...127
Discrete TBX (DES, DMS, DSS)
1...62
1...62, 64...127
1...62, 64...127
Discrete TBX compact (CEP and CSP)
1...31
1...31
1...31
TSX (37 and 57)
1...62
1...62
1...62
Waterproof IP65 (EEP, ESP)
1...62
1...62, 64...127
1...62, 64...127
Waterproof IP67 (EEF, ESF, EMF)
1...62
1...62, 64...99
1...62, 64...99
Memory Space
Each processor has a memory space available for Fipio devices. This memory space equals 95744 bytes for TSX P57 154/254/354 processors and 214528 bytes for TSX P57 454/554 processors.
Each Fipio device connected to the bus uses part of this memory space. The memory used by the devices connected to the Fipio bus must be less than the processor’s available memory. When calculating the memory used, you must add an offset of 1424 bytes.
The following table lists the memory values used in bytes for each device.
Module
Base
ATV38 with VW58311 card
1280
ATV58/58F with VW-A58301 card
1808
ATV58/58F PKW with VW58311 card
1280
ATV 68
1280
Magelis
1424
EEF 08D2, EEF 16D2
832
ESF 08T22 EMF 16DT2
1808
FED C32
1280
FED C32P
2304
FED M32
1424
FED M32P
2448
FRD C2
832
FSD C8
896
FSD C8P
1808
FSD M8
1040
FSD M8P
1952
Premium/Micro Agent
1424
Lexium
1424
Inductel
1808
Advantys STB 2 words
832
Advantys STB 8 words
896
Advantys STB 32 words
1280
Example:
Or a TSX P57 154 processor.
Two Magelis and a standard profile FSD C8P are connected to the Fipio bus.
The memory used equals 6080, i.e.: 1424+1424+1808+1424 (offset).
In this case, the memory used by the devices (6080) is less than the processor’s memory (95744).