How to Configure the Driver
(Original Document)
About us
At a Glance
During driver installation, a default profile is proposed. This profile can be modified or a new one created.
How to Create a New Profile
From the driver Uni-telway configuration screen:
Step
Action
1
Click on the Add... button. see Uni-Telway Parameters.
2
Enter station name.
3
Select COM port.
4
Define the driver slave address.
5
If the driver uses a modem to communicate, select the Use modem box and enter the different fields associated with it.
6
Select the Link parameters tab.
7
Configure the transmission parameters according to the remote device (baud rate, parity, data bits, etc.).
8
If the driver requires specific configuration, click on the Advanced tab and configure the parameters according to the remote device.
9
Accept the configuration by clicking on Ok.
Result: the new configuration appears in the list.
How to Modify a Profile
From the Uni-telway configuration screen:
Step
Action
1
Select a configuration profile from the list.
Result: the cursor moves to the selected line.
2
Click on the Modify button; see Uni-Telway Parameters.
3
Modify the parameters according to the remote device.
4
Select the Link parameters tab and modify the transmission parameters according to the remote device (speed, parity, data, etc.).
5
If the driver requires specific configuration, click on the Advanced tab and modify the parameters according to the remote device.
6
Accept the configuration by clicking on Ok .
Result: the new configuration appears in the list.
How to Remove a Profile
From the Uni-telway configuration screen:
Step
Action
1
Select a configuration profile from the list.
Result: the cursor moves to the selected line.
2
Click on Delete.
3
Press the Yes button to confirm your choice.
Result: the configuration is removed from the list.
How to Activate a Profile
From the Uni-telway configuration screen.
Step
Action
1
Select a profile from the list.
Result: the cursor moves to the selected line.
2
Click on the Apply button.