How to define a new slave profile in the standard AS-i V2 catalog
(Original Document)
About us
At a Glance
The Control Expert software offers the possibility of defining a slave profile, which was not provided, in the standard catalog.
The new profile, defined in this way, is added to the catalogue in Private family.
This profile can then be used as a standard catalogue profile.
Procedure
The following table presents the procedure for defining a slave profile, which is not provided in the standard catalogue.
Step
Action
1
Access the AS-i module’s hardware configuration screen.
2
Double click in a slave’s host cell (1 to 31 /A or /B).
Result: The screenAssociate a profile appears.
3
Select Private family in the field AS-i Family Name.
Result: The AS-i catalog linked to the selected family appears.
4
Click on the buttonAdd.
A new AS-interface profile definition window opens.
5
Enter:
  • the name of the new profile,
  • a comment (optional).
6
Select:
  • the IO code (corresponds to the input/output configuration),
  • the ID code (identifier) (plus ID1 and for an extended type),
7
For each parameter define:
  • the system’s acknowledgement (box checked),
  • a label (optional).
8
Confirm the introduction of a new profile using Confirm.