When Installing BMX EIA 0100
When installing the module, be sure to:
-
Connect the PLC ground terminal to ground
-
Tighten the retaining screw to make sure the module is held in the rack
-
Use an SELV (Safety Extra Low Voltage) AS-Interface power supply, with 30 VDC nominal voltage
-
Place a earth fault detection device upstream of the AC supply connected to the PLCs that disconnects this power supply source if an earth leakage is detected
-
Ensure, for PLCs connected to a DC power supply source, that the power supply placed upstream of the PLC is SELV
-
Use only AS-Interface certified products on the bus