Characteristics of the TSX AEY 1614 Module
(Original Document)
About us
At a Glance
This section describes the general characteristics of the TSX AEY 1614 module.
General Characteristics
The following table shows the general characteristics of the TSX AEY 1614 module:
Input types
Thermocouple inputs
Nature of inputs
Multi-range
Number of channels
16
Acquisition cycle time:
  • Fast (periodic acquisition of channels designated as being In Use)
  • Normal (periodic acquisition of all channels)
Number of dual channels used x 70ms (1)
1120 ms
Analog / Digital converter
16 bits (0...65535 points)
Wiring test
8 ms
Digital filtering
1st order (time constant = 0 to 128 x module cycle time)
Insulation:
  • between channels
  • between channels and bus
  • between channels and ground
100 V rms
1000 V rms
1000 V rms
Insulation resistance below 500VDC between channel and ground
> 10 mOhms
Input impedance
> 10 mOhms
Linearization
Automatic
Max. voltage surge allowed in differential mode on inputs
+/-30 VDC
Common mode voltage allowed in operation:
  • between channels
  • between channels and ground
250 VDC or 280 VAC
240 VAC
Common mode rejection between channels and ground
110 dB (VDC-VAC 50/60 Hz)
Series mode rejection at 50/60 Hz
100 dB
Cold junction compensation:
  • on TELEFAST2
  • external Pt100 class A on channel 0
between -5 and +60°C
between -5 and +85°C
Max. line resistance for the wiring test
500 Ohms
Max. power dissipation
2 W
PLC standards
IEC1131, IEC801, IEC68, UL508, UL94
Electrical range
+/-80 mV
Sensor standards
IEC584, IEC751, DIN43760, DIN43710, NFC42-330
Legend:
(1)
This calculation does not take any test into account. For further information, please refer to the following manual: ...