Module Diagnostic Object

Overview

The Module Diagnostic CIP object consists of the attributes and services described below.

Attributes

The Module Diagnostic CIP object consists of the following attributes:

1. Class attributes:

ID (hex)	Description	GET	SET
01	Revision	X	—
02	Max Instance	X	—
X = supported — = not supported

2. Instance attributes:

ID (hex)	Description	Type	GET	SET	Value
01	Module Status	WORD	X	—	01=started 02=stopped 03=running
02	CNF Version	WORD	X	—	0x0100
03	CRC	UDINT	X	—	—
04	I/O Connection Status	STRUCT	X	—	—
	Size Table	WORD			size (16 bytes)
	Table	WORD[]			table of I/O status (8 WORDS) 1=INPUT and OUTPUT status of I/O connection are OK 0=at least 1 INPUT or OUTPUT status of I/O connection is not OK
05	Cco Mode	WORD	X	X	01=activate status to CCO in the module 02=block access to CCO
X = supported — = not supported

Services

The CIP Module Diagnostic object performs the following services upon the listed object types:

ID (hex)	Description	Class	Instance	Notes
01	Get_Attributes_All	X	X	—
0E	Set_Attributes_Single	—	X	—
X = supported — = not supported