Identity Object
Original instructions
About us
Overview
The Identity CIP object consists of the attributes and services described below.
Attributes
The Identity CIP object consists of the following attributes:
1. Class attributes:
ID (hex)
Description
GET
SET
01
Revision
X
—
02
Max Instance
X
—
X = supported
— = not supported
2. Instance attributes:
ID (hex)
Description
Type
GET
SET
01
Vendor ID
UINT
X
—
02
Device Type
UINT
X
—
03
Product Code
UINT
X
—
04
Revision
STRUCT
X
—
    Major
USINT
    Minor
USINT
05
Status
bit 2:
    0x01=the module is configured
bits 4-7:
    0x03=no I/O connections established
   0x06=at least 1 I/O connection in run mode
   0x07=at least 1 I/O connection established, all in IDLE mode
Word
X
—
06
Serial Number
UDINT
X
—
07
Product Name
STRING
X
—
X = supported
— = not supported
Services
The CIP Identity object performs the following services upon the listed object types:
ID (hex)
Description
Class
Instance
Notes
01
Get_Attributes_All
X
X
Applies to all class and all instance attributes
0E
Get_Attributes_Single
X
X
Applies to all class and all instance attributes
05
Reset
—
X
Two types:
00=power cycle
01=return to factory defaults and power cycle
X = supported
— = not supported