Description of Attributes

For more information on the events that are logged, refer to Logging DTM and Module Events to the SYSLOG Server help of the module.

Attribute

Default value

Description

Enabled

False (cleared)

When selected (true):

  • Enables event logging for each possible originator of logged events in the architecture.

  • Syslog server attributes are enabled and the configured values are propagated to each event-logging originator in the architecture.

The attribute is not available for system projects.

NOTE: When the attribute is selected, clearing it and selecting it again replaces the values that were configured for IP Address and Port with those of the system projects.

Reset to default

N/a

Replaces the current values of IP Address and Port with the values that are configured for the system project.

The attribute is not available for system projects.

IP Address (1)

  • For a system project: 0.0.0.0

  • For a PAC: Value that is configured for the system project

IP address of the Syslog server to which event logs are sent.

This address is embedded in the application.

Protocol

TCP

Protocol that is used for communications with the Syslog server.

Read-only.

Port (1)

  • For a system project: 601

  • For a PAC: Value that is configured for the system project

Port that is used for communications with the Syslog server.

Range: 0...65535

(1) The attributes are editable only if in the Security Editor of the computer acting as system server, security is either on in Standard mode or off.