Port Statistics
Original instructions
About us
Introduction
Use the Port Statistics page to display the following data for the BMX NOC 0401 Ethernet communication module:
Port Statistics Display
The Port Statistics page looks like this:
Click on the Reset counters button to reset the counting statistics to zero.
To open this page:
Step
Action
1
Starting at the Home page, click the Diagnostics main menu item. The Diagnostics page opens.
2
On the left side of the Diagnostics page, select Ethernet → Switch → Port Statistics.
3
If necessary, type in the HTTP web access password.
NOTE: The default password is USER.
Port Statistics Descriptions
The Port Statistics page displays the following parameters for each communication module port:
Parameter
Description
Ethernet Configuration data:
Hostname
The name assigned to the communication module
MAC Address
The factory assigned Media Access Control (MAC) address, consisting of 6 hexidecimal octet values
IP Address
The Internet Protocol (IP) address that has been assigned to the communication module
Subnet Mask
The subnet mask that has been assigned to the communication module
Gateway
The IP address of the remote device, if any, that serves as a gateway to the communication module
Port Statistics:
Interface Label
Un-Initialized or Initialized
Speed (Operational)
Baud rate: 0, 10, 100 Mbps
Duplex (Operational)
Twisted Pair— Full Link, Twisted Pair—Half Link
Frames transmit OK:
The number of frames that have been successfully transmitted
Frames received OK:
The number of frames that have been successfully received
Collisions:
The number of times a collision between two successfully transmitted packets was detected on the link
Excessive collisions:
The number of times the transmitter has not been successful after 16 attempts to transmit a frame, due to repeated collisions
CRC errors:
The number of times a CRC (FCS) error was detected on an incoming frame
Number Bytes Received:
Number of inbound bytes received on the interface
Number Inbound Packets Error:
The number of inbound packets that contain detected errors (not included in discards)
Number Inbound Packets Discard:
The number of inbound packets received on the interface, but discarded
Number Bytes Sent:
The number of outbound bytes transmitted on the interface
Number Outbound Packets Error:
The number of outbound packets that contain detected errors (not included in discards)
Number Outbound Packets Discard:
The number of outbound packets discarded while attempting to send them