IEC60870-5-101/104 servers support this process information in the monitored direction:

• M_SP: single-point information

• M_DP: double-point information

• M_ME_A: measurements value, normalized value

• M_ME_B: measurements value, scaled value

• M_ME_C: measurements value, short floating-point

• M_IT: integrated totals

• M_ST: step position information

• M_BO: bit and byte strings

IEC60870-5-101/104 servers support this process information in the control direction:

• C_SC: single command

• C_DC: double command

• C_SE_A: set-point command, normalized value

• C_SE_B: set-point command, scaled

• C_SE_C: set-point command, short floating-point number

• C_RC: regulating step command

• C_BO: bit-string of 32 bits

IEC60870-5-101/104 servers support this system information in the monitored direction:

• M_EI: end of initialization with COT of initialized

• M_EI_NA: After receiving an M_EI_NA EOI message, you can configure these items:

  • general interrogation information

  • clock synchronization

  • counter-interrogation

IEC60870-5-101/104 servers support this system information in the control direction:

• C_IC: These interrogation command points support G/1~16 qualifiers and the Deactivation/Activation operation modes.

• C_CI: These counter-interrogation commands support G/1~4 qualifiers and Read/Freeze/Freeze-With-Reset/Reset operation modes.

• C_CS: clock synchronization commands

• C_TS: test commands

  C_RP: These reset process command points support the General/Event qualifiers.

• C_RD: read commands

IEC60870-5-101/104 servers support these parameters in the control direction:

• P_ME_A: parameter for measurement, normalized value

• P_ME_B: parameter for measurement, scaled value

• P_ME_C: parameter for measurement, short-floating point number

• P_AC: parameter activation support for the Deactivation/Activation operation mode

IEC60870-5-101/104 servers support 64–bit M_CUSTOME_IT_D points, which support the mapping functions to the Device DDT variables of the CPU.