Get Status Summary (Op Code 0x76)
This function returns information about the LEDs and various services running on the BMENOR2200H module.
Request
Field |
Length (bytes) |
Value (hex) |
|---|---|---|
Function code |
1 |
08 |
Sub-function code hi |
1 |
00 |
Sub-function code low |
1 |
15 |
Operation code hi |
1 |
00 |
Operation code low |
1 |
76 |
Response
Field |
Length (bytes) |
Value (hex) |
|---|---|---|
Function code |
1 |
08 |
Sub-function code hi |
1 |
00 |
Sub-function code low |
1 |
15 |
Operation code hi |
1 |
00 |
Operation code low |
1 |
76 |
Byte count |
1 |
206 |
Number of LEDs |
2 |
7 |
LED 1 color |
2 |
Off (default): byte0=0, byte1=0 On (green): byte0=1, byte1=0 Flashing (green): byte0=1, byte1=1 |
LED 1 status |
2 |
0 |
LED 1 name string |
4 |
RUN |
LED 2 color |
2 |
Off (default): byte0=0 On (red): byte0=2, byte 1=0 Flashing (red): byte0=2, byte1=1 |
LED 2 status |
2 |
0 |
LED 2 name string |
4 |
ERR |
LED 3 color |
2 |
Off (default): byte0=0, byte1=0 On (red): byte0=2, byte1=0 |
LED 3 status |
2 |
0 |
LED 3 name string |
3 |
DL |
LED 4 color |
2 |
Off (default): byte0=0, byte1=0 On (green): byte0=1, byte1=0 Flashing (green): byte0=1, byte1=1 On (red): byte0=2, byte1=0 |
LED 4 status |
2 |
0 |
LED 4 name string |
8 |
ETH STS |
LED 5 color |
2 |
Off (default): byte0=0, byte1=0 On (red): byte0=2, byte1=0 |
LED 5 status |
2 |
0 |
LED 5 name string |
9 |
CARD ERR |
LED 6 color |
2 |
Off (default): byte0=0, byte1=0 On (green): byte0=1, byte1=0 On (red): byte0=2, byte1=0 |
LED 6 status |
2 |
0 |
LED 6 name string |
7 |
SECURE |
LED 7 color |
2 |
Off (default): byte0=0, byte1=0 Flashing (yellow): byte0=3, byte1=1 |
LED 7 status |
2 |
0 |
LED 7 name string |
8 |
SER COM |
Number of services |
2 |
9 |
Service 1 color |
2 |
0 = off or n/a 1 = green 2 = red |
Service 1 status |
2 |
4 (corresponds to LED color 0) (default) 2 (corresponds to LED color 1) 5 (corresponds to LED color 2) |
Service 1 name string |
12 |
DNP3 Client |
Service 2 color |
2 |
0 = off or n/a 1 = green 2 = red |
Service 2 status |
2 |
4 (corresponds to LED color 0) (default) 2 (corresponds to LED color 1) 5 (corresponds to LED color 2) |
Service 2 name string |
11 |
IEC Client |
Service 3 color |
2 |
0 = off (default) 1 = green |
Service 3 status |
2 |
1 (corresponds to LED color 1) 3 (corresponds to LED color 0) (default) |
Service 3 name string |
12 |
DNP3 Server |
Service 4 color |
2 |
0 = off (default) 1 = green |
Service 4 status |
2 |
1 (corresponds to LED color 1) 3 (corresponds to LED color 0) (default) |
Service 4 name string |
11 |
IEC Server |
Service 5 color |
2 |
0 = off (default) 1 = green |
Service 5 status |
2 |
1 (corresponds to LED color 1) 3 (corresponds to LED color 0) (default) |
Service 5 name string |
15 |
Access Control |
Service 6 color |
2 |
0 = off (default) 1 = on green 2 = on red |
Service 6 status |
2 |
4 (corresponds to LED color 0) (default) 2 (corresponds to LED color 1) 5 (corresponds to LED color 2 - link to server is down)) |
Service 6 name string |
12 |
SNTP Status |
Service 7 color |
2 |
0 = off (default) 1 = on green 2 = on red |
Service 7 status |
2 |
4 (corresponds to LED color 0) (default) 2 (corresponds to LED color 1) 5 (corresponds to LED color 2 - link to server is down)) |
Service 7 name string |
14 |
E-mail Status |
Service 8 color |
2 |
0 = off (default) 1 = green |
Service 8 status |
2 |
1 (corresponds to LED color 1) 3 (corresponds to LED color 0) (default) |
Service 8 name string |
14 |
Modbus Server |
Service 9 color |
2 |
0 = off (default) 1 = green |
Service 9 status |
2 |
1 (corresponds to LED color 1) 3 (corresponds to LED color 0) (default) |
Service 9 name string |
12 |
FTP Server |
LED Status
Refer to the Module LED Indicators topic for LED descriptions.
LED Status Number (hex) |
Description |
|---|---|
1 |
Ready for operation. |
2 |
Not ready for operation. |
3 |
Fault detected. |
4 |
No fault detected. |
5 |
In operation. |
6 |
Duplicate IP address. |
7 |
Waiting for address server response. |
8 |
Default IP address in use. |
9 |
IP address configuration conflict detected. |
A |
Not configured. |
B |
Recoverable fault detected. |
C |
Connectors established. |
D |
No EtherNet/IP or RTU connections. |
E |
Connections error. |
F |
Running. |
10 |
Error present. |
11 |
Ethernet link established. |
12 |
No Ethernet link established. |
13 |
Connected to 100 Mbps link. |
14 |
Not connected to 100 Mbps link. |
15 |
Connected to full duplex link. |
16 |
Not connected to full duplex line. |
17 |
Configuration error. |
18 |
Memory card is missing. |
19 |
Memory card is not usable (bad format, unrecognized type). |
20 |
Data exchange (send/receive) on the serial connection is in progress. |
21 |
No data exchange on the serial connection. |
22 |
Firmware download in progress. |
23 |
Firmware download not in progress. |
24 |
Module and communication are encrypted. |
25 |
Module is encrypted, and communication is not encrypted. |
26 |
Module is not encrypted. |
Services Status
Service Status Number |
Description |
|---|---|
1 |
Enabled. |
2 |
Working properly. |
3 |
Disabled. |
4 |
Not configured. |
5 |
One connection or more are bad. |
6 |
Enabled on. |
7 |
Enabled off. |
Get Firmware Version (Op Code 0x70)
This function returns the firmware version of the BMENOR2200H module.
Request
Field |
Length (bytes) |
Value (hex) |
|---|---|---|
Function code |
1 |
08 |
Sub-function code hi |
1 |
00 |
Sub-function code low |
1 |
15 |
Operation code hi |
1 |
00 |
Operation code low |
1 |
70 |
Response
Field |
Length (bytes) |
Value (hex) |
|---|---|---|
Function code |
1 |
08 |
Sub-function code hi |
1 |
00 |
Sub-function code low |
1 |
15 |
Operation code hi |
1 |
00 |
Operation code low |
1 |
70 |
Byte count |
1 |
|
PV version |
1 |
xx |
RL version |
1 |
xx |
SV major version |
1 |
xx |
SV minor version |
1 |
xx |
Web server version |
1 |
xx |
Rack |
1 |
xx |
Slot |
1 |
xx |
MAC |
6 |
xx.xx.xx.xx.xx.xx |
SN |
n |
xxxxxxxxxxx |