Introduction

The BMENOR2200H module has a built-in web server that provides various web pages offering setup, diagnostic, cyber security, and monitoring features.

Access the web pages for the BMENOR2200H module by entering the IP address or URL of the module in a web browser.

These are the main tabs on the Home page:

  • DIAGNOSTICS

    : Access this tab to configure diagnostics for the BMENOR2200H web pages and the device DDT as configured in a Control Expert application.

  • FILE EXPLORER

    : Access data logging information through the file explorer.

  • SETUP

    : Access this tab to define security and access rights for the module.

Browser Requirements

Observe these browser version requirements to use the web pages:

Browser

Requirememt
Google Chrome

50+ (recommended)
Mozilla Firefox

40+
Microsoft Edge

14+
Internet Explorer

11

Connecting via the HTTPS Protocol

If your application experiences connection problems, check with your local IT support to confirm that your network configuration and security policies are consistent with HTTPS (port 443) access to the RTU module IP address.

The RTU module accepts the HTTPS connections with transport layer security (TLS) protocol v1.2 or later. For example, Windows 7 could require an update to enable TLS 1.2 to upgrade the firmware of the RTU module or access to its web site.

Access the Web Pages

Step

Action

1

Enter the module’s IP address or URL (https://...) in a web browser to open the module’s Home page.

NOTE:

  • Web access via the URL is not supported by the BMENOR2200H module, but it can be implemented by system integration.

  • You may see an on-screen message that says the web pages are not secured. Ignore this message and open the web page.

  • When the module processes a heavy communications load, the web page may not open immediately. In this case, execute your browser's refresh function.

2

In the pull-down menu, select the appropriate language.

3

Enter the default user name and password that conforms to the selected cyber security mode the first time you access the web:

  • Advanced cyber security mode:

    • user name: admin

    • password: password

  • Standard cyber security mode:

    • user name: installer

    • password: Inst@ller1

4

Click the Login button.

5

Change your user name and password when prompted.