At a Glance
A functional module can be created off-line, with the PLC at Stop or in Run.
It can be created at the Project level or at the level of each existing functional module.
Creating a new functional module
Carry out the following actions:
Step |
Action |
---|---|
1 |
In the functional view, right-click the Functional Project directory. |
2 |
Select New Functional Module. |
3 |
Enter the name and comment and confirm with OK. |
Creating a lower level functional module
Carry out the following actions:
Step |
Action |
---|---|
1 |
In the functional view, right-click the module "above", in the Functional Project directory. |
2 |
Select New Functional Module. |
3 |
Enter the name and comment and confirm with OK. |
Moving a functional module
A functional module can be moved off-line, with the PLC at Stop or in Run (this has no effect on the execution of the project). The movement corresponds only to a modification of the functional architecture of the project (a module is directly attached to the Functional Project directory level or to another functional module).
Moving a functional module:
Step |
Action |
---|---|
1 |
Left-click on the module to be moved (holding down the mouse button), |
2 |
Move the module to the desired position. |