Board unit characteristics
Original instructions
About us
Overview
This is the technical description of the board unit characteristics
Altitude Operating Conditions
The characteristics in the table below apply to the module BMX MSP 0200 for use at altitude up to 2000 m (6560 ft). When the modules operate above 2000 m (6560 ft), apply additional derating.
For detailed information, refer to chapter Operating and Storage Conditions.
Caracteristics table
Board unit characteristics
Consumption 3.3 V
Typical
< 150 mA
Maximum
200 mA
Consumption 24 V pre-actuator
Without load
Maximum: 35 mA
Dissipated power
AT 24V, 0 active input: 1.4 W
AT 24V, 8 active inputs: 2.8 W
Dielectric strength (internal logic)
Primary / Secondaries
1500 Vrms
Between channel groups
Not Isolated
Insulation resistance
>10 MΩ
Operating temperature
0 to 60°C (32 to 140 °F)
WARNING
HAZARDOUS PERFORMANCE
Respect the working temperature range as it affects the module performances.
Failure to follow these instructions can result in death, serious injury, or equipment damage.