Questions and Answers

List

Table of malfunctions

Malfunction	Possible causes
The cam processor does not switch to RUN mode	The module has not been recalibrated (bit %Ixy.0.0.i=0). There is no encoder supply Lack of auxiliary input supply NOTE: If the faults have been masked, a fault can prevent the switch to RUN mode without appearing!
The cam processor changes to stop mode without modifying bit %Qxy.0.5 (PCAM_START_STOP)	Loading a recipe using the commands WRITE_PARAM RESTORE_PARAM TRF_RECIPE
No action on the outputs	The outputs are already valid OUTS_ENABLE Parallelization of a track without configured cam Forced outputs Inverted outputs
Loss of modifications to the current recipe	When switching to local mode, if the save has not been done when adjusting the recipe
Following modification to the configuration, the browser turns red and it is not possible to confirm the configuration	A parameter is no longer compatible with the new configuration Switch to recipe adjustment Click on No when requested to confirm Modify the parameter Confirm

Recipe

The recipe groups together the data required for the module to control the machine for a series of parts. The recipe can be modified or completely changed by the PLC application. All this information is contained in the PLC %MW words in the memory zone reserved for the module.

Configuration

The configuration gathers together the data which characterizes the machine (invariant) and which is necessary for the TSX CCY 1128 module to operate.

All this information is stored in the PLC %KW constants zone. The PLC application cannot modify them.