The Recipes

The Recipes

(Original Document)

At a glance

Two are managed. These recipes are stored in the following %MW words:

Recipe 1	%MW100 to %MW816
Recipe 2	%MW850 to %MW1566

Parameters for recipe 1

This table describes the parameters for recipe 1:

Track	Cam	Positions		Direction	Enabling
Track 0	Cam 0	position X1=800	X2=820	Forward	enable by bit:0
Track 1	Cam 1	position X1=600	X2=620	Forward	enable by bit:1
Track 2	Cam 2	position X1=400	X2=420	Forward	enable by bit:2
Track 3	Cam 3	position X1=200	X2=220	Forward	enable by bit:3
Track 4	Cam 4	position X1=0	X2=20	Forward	enable by bit:4
Track 5	Cam 5	position X1=800	X2=900	Forward	enable by bit:5
Track 6	Cam 6	position X1=200	Tempo 100 ms	Forward	full counter
The parts counter is incremented by track 5. The parts counter is reset by track 6.

Parameters for recipe 2

This table describes the parameters for recipe 2:

Track	Cam	Positions		Direction	Enabling
Track 0	Cam 0	position X1=800	X2=900	Forward	enable by bit:0
Track 1	Cam 1	position X1=600	X2=700	Forward	enable by bit:1
Track 2	Cam 2	position X1=400	X2=500	Forward	enable by bit:2
Track 3	Cam 3	position X1=200	X2=300	Forward	enable by bit:3
Track 4	Cam 4	position X1=0	X2=100	Forward	enable by bit:4
Track 5	Cam 5	position X1=800	X2=900	Forward	enable by bit:5
Track 6	Cam 6	position X1=200	Tempo 100 ms	Forward	full counter
The parts counter is incremented by track 5. The parts counter is reset by track 6.

© 2018 Schneider Electric. All rights reserved.

Recipe

The recipe groups together the data required for the module to control the machine for a series of parts. The recipe can be modified or completely changed by the PLC application. All this information is contained in the PLC %MW words in the memory zone reserved for the module.